WebSphere Portal 7 Message Catalog

First Edition

Published September 2010

About this edition

Printing

When you print this document some of the style elements are removed to create a better print output. Here are a few tips about printing:
  • The document length may exceed the browser's print capability. Microsoft Internet Explorer has demonstrated the ability to print large files successfully.
  • This document is long. Use print preview to determine the printed page length.
  • You can highlight section of the document and then choose to only print the selected content

Working offline

You can save a local copy of this document from your browser. Each browser has different menus and menu options. Consult the browser help if you need assistance saving the document locally.

Submitting feedback

If you would like to provide feedback about this document, then Submit Feedback.

BMWFM: com.ibm.mashups.resources.Messages

BMWFM0001E

More than one provider defined for {0}.

Explanation

There are too many model providers defined for a given id.

User response

Notify the administrator that there is a wrong set of plugins installed, defining too many model providers.

BMWFM0002E

Invalid Model extension point detected: no serviceId.

Explanation

There was a model extension point found with no service id.

User response

Notify the administrator that there is a wrong set of plugins installed, defining an extension point with no service id.

BMWFM0003E

Exception creating extension info.

Explanation

There was an extension while creating a model extension.

User response

Notify the administrator that there is an error happening creating a model extension point

BMWIW: com.ibm.mm.enabler.resources.iwMessages

BMWIW0001E

The ${0} widget is unavailable. Check your network connection, or contact your administrator.

Explanation

Either you are experiencing network problems, or the ${0} widget cannot be found on the requested server.

User response

Check your network connection, or contact your administrator.

BMWIW0002E

Unable to find content for mode -- ${0}.

Explanation

This is an error message. The system cannot handle this condition without failing.

User response

No action is required.

BMWIW0003E

Unable to load the non-trusted widget ${0} because the number of sub-domains has exceeded its limit of ${1}. To add this widget to your page securely, make a sub-domain available by marking another widget as trusted.

Explanation

Unable to load the non-trusted widget because the number of sub-domains has exceeded its limit.

User response

To add this widget to your page securely, make a sub-domain available by marking another widget as trusted.

BMWIW0004E

Unable to unload widgets when browser window is unloaded. Error detail: ${0}

Explanation

This is an error message. The system cannot handle this condition without failing.

User response

No action is required.

BMWIW0005E

Unable to unload the widget ${0}. Error detail: ${1}

Explanation

This is an error message. The system cannot handle this condition without failing.

User response

No action is required.

BMWIW0006E

Unable to display the widget ${0}. Error detail: ${1}

Explanation

This is an error message. The system cannot handle this condition without failing.

User response

No action is required.

BMWIW0007E

Unable to handle event ${0} for widget ${1} . Error detail: ${2}

Explanation

This is an error message. The system cannot handle this condition without failing.

User response

No action is required.

BMWIW0008W

This method is no longer supported. Use ${0} instead.

Explanation

This warning occurred because this method is no longer supported.

User response

No action is required.

BMWIW0009E

Unable to load the non-trusted widget ${0} because the number of sub-domains has exceeded its limit of ${1}.

Explanation

Unable to load the non-trusted widget because the number of sub-domains has exceeded its limit.

User response

No action is required.

BMWIW0010E

System is unable to display non-trusted widget ${0}.

Explanation

The system is unable to display non-trusted widget ${0}.

User response

No action is required.

BMWIW0011E

Unable to load resource ${0} : ${1}.

Explanation

This is an error message. The system cannot handle this condition without failing.

User response

No action is required.

BMWIW0012W

Deprecated function: ${0}. Use ${1} instead.

Explanation

This warning occurred because a deprecated function is used.

User response

No action is required.

BMWIW0013W

iw-Standalone class is missing for widget ${0}.

Explanation

This warning occured because iw-Standalone class is missing.

User response

No action is required.

BMWIW0014E

Incorrectly Configured widget '${0}'.

Explanation

This is an error message. The system cannot handle this condition without failing.

User response

No action is required.

BMWMF: com.ibm.mm.enabler.resources.modelMessages

BMWMF0001E

Node must not be null.

Explanation

An error occurred because the system cannot handle this condition without failing.

User response

No action is required.

BMWMF0002E

Could not load the navigation node ${0}.

Explanation

System cannot load the specified navigation node.

User response

No action is required.

BMWMF0003E

This operation is unsupported.

Explanation

This operation is unsupported.

User response

No action is required.

BMWMF0004E

Cannot find node ${0}.

Explanation

System cannot find the specified node.

User response

Make sure the correct node is selected, and try again.

BMWMF0006E

No preference type is specified.

Explanation

Preference node type is required to create a new preference entry.

User response

Specify a different preference node type, and try again.

BMWMF0007E

No preference name is specified.

Explanation

Preference name is required to create a new preference entry.

User response

Specify a different preference node type, and try again.

BMWMF0008E

No context is specified when creating a new preference entry.

Explanation

A context is required to create a new preference entry. Context information includes name and node type.

User response

Specify the name and node type, and try again.

BMWMF0009E

Values cannot be set on a read-only preference node.

Explanation

An error occurred because the system cannot handle this condition without failing.

User response

No action is required.

BMWMF0010E

Cannot find node ${0}.

Explanation

System cannot find the specified node.

User response

Make sure the correct node is selected, and try again.

BMWMF0011E

Cannot find node ${0}.

Explanation

System cannot find the specified node.

User response

Make sure the correct node is selected, and try again.

BMWMF0012E

Cannot find node ${0}.

Explanation

System cannot find the specified node.

User response

Make sure the correct node is selected, and try again.

BMWMF0013E

Cannot find element ${0} in ${1}.

Explanation

The specified element cannot be accessed within the specified XML document.

User response

Make sure that the enabler API is compatible with the feeds.

BMWMF0014E

Parameter must not be null.

Explanation

Null is an unsupported parameter value.

User response

No action is required.

BMWMF0015E

Cannot find node ${0}.

Explanation

System cannot find the specified node.

User response

Make sure the correct node is selected, and try again.

BMWMF0016E

Parameter must not be smaller than zero.

Explanation

Values smaller than zero are unsupported parameter values.

User response

No action is required.

BMWMF0017E

Given context is invalid.

Explanation

Context must either have a WidgetDefinition or a WidgetURL.

User response

No action is required.

BMWMF0018E

WidgetDefinition is not identifiable.

Explanation

The widget definition must inherit from the Identifiable interface.

User response

No action is required.

BMWMF0019E

Given context does not contain a type.

Explanation

Context must contain a type.

User response

No action is required.

BMWMF0020E

Parameter count is invalid.

Explanation

Parameter count must be valid.

User response

No action is required.

BMWMF0021E

Parameter ${num} is invalid. Must be of type ${type}

Explanation

Parameter ${num} must be of type ${type}.

User response

No action is required.

BMWMF0022E

Given document must not be null.

Explanation

The document to evaluate the XPath expression on must not be null.

User response

No action is required.

BMWMF0023E

Given expression must not be empty.

Explanation

The given XPath expression must not be empty.

User response

No action is required.

BMWMF0024E

Parameter '${0}' in function '${1}.${2}' must not be null or undefined.

Explanation

Null and undefined are unsupported parameter values.

User response

Specify a non-null and non-undefined value.

BMWMF0025E

XHR request failed to execute. The request returned with status '${0}' and response data '${1}'.

Explanation

The server was unable to process the request.

User response

Check server connectivity and compatibility. Alternatively, check on authorization and availability of the requested resource.

BMWMF0026E

Object has been disposed.

Explanation

The used object has been disposed and must not used any more.

User response

No action is required.

BMWPB: com.ibm.bundles.resources.SharedMessages

BMWPB0001E

This move operation is not allowed.

Explanation

Move operations may be prohibited by Portal access control. The access rights that are set on the parent page control whether you can add, remove or rearrange the child pages.

User response

Move to an allowed location, or remove the restrictions that prevent the move operation, for example request sufficient access rights to the target from your administrator.

BMWPB0002E

Make sure you have sufficient permissions to rearrange pages.

Explanation

You administrator sets access control for pages within your site. These permissions may be granted to you explicitly, or granted to a group to which you belong.

User response

Request sufficient access rights to the target location from your administrator .

BMWPB0003E

An error occurred when rendering the navigation.

Explanation

When creating pages, the JavaScript in the browser must communicate with the server. If this communication is interrupted by an error, for example the server is unresponsive, the page may not be created successfully.

User response

First, reload the page to see if this fixes the problem. Next clear your browser cache and then reload the page. If this still does not fix the problem, log out and back in again.

BMWPB0004E

An error occurred creating the page.

Explanation

Creating the page involves executing javascript in the browser which communicates back to the server to create the page. If the javascript execution is interrupted by an error, if it can't communicate back to the server, or receive a response from the server, the page my not be created successfully.

User response

Try reloading the page multiple times. Also, ensure you are using a supported browser, and that you are currently logged in. Finally, try clearing the browser cache.

BMWPB0005E

No page templates found.

Explanation

Page templates are designed to be reused when creating pages with related content. Page templates are stored in a specific location that users can access at the time they are creating new pages. If no templates have been created and stored, users will not see them as options when creating pages.

User response

Ensure you are logged in and can connect to the server. If no templates are found, there may be no page templates defined. First create a page template, and try again.

BMWPB0007E

Error reading configuration file or processing its content.

Explanation

Configuration files are edited by site administrators to control what options are displayed in the page customization widgets. If the file is edited and is not structured correctly, the widgets will not be able to parse it and render based on its content.

User response

Try clearing the browser cache and reloading the page. If you are an administrator, correct the error in the configuration file and try again.

BMWPB0008E

${0} cannot be loaded because the data store for this content source is undefined.

Explanation

Each category of content is backed by a JavaScript data store object that retrieves the list of content available from that source. The content sources are defined in the theme configuration file add_content.json. This configuration includes the name of the data store JavaScript object for the content source.

User response

First try clearing the browser cache and reloading the page. If you are an administrator, check the add_content.json configuration file and ensure the data store object defined for this source is correct. If correct, ensure the JavaScript file that defines this data store is loaded in the theme.

BMWPB0009E

${0} cannot be loaded. Check the internet connection and proxy settings.

Explanation

For security reasons, JavaScript in the browser can only communicate back to the server the page came from. So, if JavaScript wants to load a URL from another server, such as an RSS feed, the JavaScript must first go back to the Portal server, where the AJAX proxy requests the RSS feed and sends it back to the calling JavaScript . The AJAX proxy is configured to allow only trusted content to pass through. You can configure which servers you choose to trust in the proxy configuration.

User response

Make sure you have an Internet connection and that the URL to the feed you are accessing is allowed through the Portal AJAX proxy.

BMWPB0011E

Internal server error.

Explanation

Page builder widgets require communication with the server to function.

User response

BMWPB0012E

Your session has timed out. Log in to continue.

Explanation

User response

BMWPB0013E

Content cannot be added to the page while there is a portlet in maximized mode.

Explanation

Maximizing a portlet hides the portlet containers on the page. Adding portlets to the page requires that the portlet containers be visible.

User response

Unmaximize the portlet before adding content.

BMWPB0014E

The layout cannot be changed while there is a portlet in maximized mode.

Explanation

Maximizing a portlet hides the portlet containers on the page. Changing the layout of the page requires that the portlet containers be visible.

User response

Unmaximize the portlet before changing the layout.

BMWPB0015E

Content cannot be added to the page while there is a component maximized.

Explanation

Maximizing a component hides the component containers on the page. Adding components to the page requires that the component containers be visible.

User response

Unmaximize the component before adding content.

BMWPB0016E

The layout cannot be changed while there is a component maximized.

Explanation

Maximizing a component hides the component containers on the page. Changing the layout of the page requires that the component containers be visible.

User response

Unmaximize the component before changing the layout.

BMWPB0017E

The resource bundle ${0} could not be found

Explanation

Localized strings are stored in resource bundles for each supported locale. The server loads the appropriate resource bundle based on the list of locales supported and the locale defined in the browser. An error can occur if the resource bundle is not in the correct location, if the bundle does not have the proper name, or if the file does not exist.

User response

Ensure the resource bundle is in the correct path with the correct name and that list of supported locales in Portal is configured correctly.

BMWPB0018E

The key ${0} was undefined in the resource bundle ${1}

Explanation

Each resource bundle must contain all of the keys required by the component. If a particular locale is missing a key, or if the component is configured to look up an incorrect key, an error will result.

User response

Add the proper key and its corresponding localized value to the resource bundle.

BMWPB0019E

Content cannot be added to pages with legacy layouts. Assign a layout and save your changes to use this feature.

Explanation

Page builder widgets require a layout template in order to edit the page. Pages based on layout templates have a flat list of containers in their underlying model, which is a characteristic widgets rely on when performing edit operations. Legacy layouts allow for arbitrary nesting or rows and columns, with only leaf nodes containing portlets. When you assign a layout template, the layout model is converted to the new type to allow for editing.

User response

To add content, use the Change Layout widget to assign a layout template and save your changes.

BMWPB0020E

Content cannot be added to pages with legacy layouts. Assign a layout template.

Explanation

Page builder widgets require a layout template in order to edit the page. Pages based on layout templates have a flat list of containers in their underlying model, which is a characteristic widgets rely on when performing edit operations. Legacy layouts allow for arbitrary nesting or rows and columns, with only leaf nodes containing portlets. When you assign a layout template, the layout model is converted to the new type to allow for editing.

User response

To add content, use the Change Layout widget to assign a layout template and save your changes.

BMWPB0021E

Error adding content to the page.

Explanation

Adding content may fail for various reasons, for example the page could have been modified or deleted, the current user's access may have changed, a JavaScript error in the page may have conflicted with the operation of the page builder widgets, or the server communication may have been disrupted.

User response

Reload the page and try again.

BMWPB0022E

Could not find the specified renderer.

Explanation

Each content source is configured with the portlet or widget that gets added to the page to render the requested content. If the name or ID of the renderer is specified incorrectly in the configuration file, or if the renderer is not deployed and available, the Add Content widget will not be able to add the portlet or widget to the page.

User response

Ensure the content source is configured properly in add_content.json and that the specified renderer is deployed to the Portal server.

BMWPB0023E

${0} is not allowed on this page

Explanation

You can optionally configure pages so that only a list of allowed portlets can be added to the page. If you attempt to add a portlet that is not in this list, an error displays. Note that content sources shipped with WebSphere Portal filter out portlets that are not allowed on the page automatically. You may see this error if a custom content source has been created for this server, or if the server-provided sources have been modified.

User response

Select content that is allowed on the page, or add this content to the list of allowed content.

BMWPB0024E

The specified style does not exist

Explanation

The styles available in the Change Styles widget are configured in the changeStyles.json configuration. The assigned style is assigned to each page. When the Change Style widget is loaded, the currently assigned style is displayed as selected. However, if a page is assigned a style, but that style is later removed from the configuration, it cannot be selected, and this error is displayed. A new style can be selected, or if the original style is later added to the configuration, it will then remain selected for this page.

User response

Select another style, or correct the Change Style widget configuration.

BMWPB0025E

Error with layout template sync.

Explanation

When a page is based on a layout template, this template is stored in the page definition. If the template is later updated, the updates are not automatically applied to the page, but must be explicitly requested by the user. This replaces the page definition with that of the layout template. All layout container contents are preserved.

User response

Try to synchronize the page with the template again. If this fails, you can either edit the static page definition directly, or choose a different layout template.

BMWPB0026E

Javascript library ${0} did not load completely. Some parts of the page may not function.

Explanation

If a JavaScript error occurs while the browser is loading a JavaScript file, the JavaScript does not get evaluated, and any function that requires this JavaScript will not function. Depending on which file is affected and where the error occurred, this error can either break the entire page or be virtually unnoticeable.

User response

Clear the browser cache and reload the page.

BMWPB0027E

Javascript is disabled in this browser. This page requires Javascript.

Explanation

For security reasons, web browsers provide the option to control whether Javascript is allowed to run. This can be set globally, or per site.

User response

Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

BMWPB0028E

Error reading configuration file ${0} or processing its content.

Explanation

Site administrators can edit configuration files to control which options are displayed in page customization widgets. If the edits are not structured correctly, the widgets will not be able to parse and render the file content.

User response

Try clearing the browser cache and reloading the page. If you are an administrator, correct the error in the configuration file and try again.

BMWPX: com.ibm.mm.proxy.resources.Messages

BMWPX0008E

Error occurred when initializing the proxy-config.xml file

Explanation

An error occurred because the proxy servlet cannot initialize correctly.

User response

Provide the proxy-config.xml file in a correct format.

BMWPX0009E

The request method is not supported.

Explanation

This is an error message. The request can't be processed.

User response

Try the request with another method.

BMWPX0010E

Error while parsing the proxy-config stream

Explanation

An error occurred because the proxy servlet cannot initialize correctly.

User response

Provide a stream to the proxy-config.xml file in a correct format.

BMWPX0011W

The Ajax proxy has been enabled to support unsigned Secure Sockets Layer (SSL) certificates.

Explanation

To support unsigned SSL certificates, the Ajax proxy overrides the HTTPS handling protocol to accept any SSL certificate. Do not accept unsigned certificates in a production environment.

User response

If you cannot accept unsigned SSL certificates, remove the unsigned_ssl_certificate_support parameter from the proxy-config.xml file or set the parameter value to false.

BMWPX0012E

A Bad Gateway error has occurred with a 502 response code.

Explanation

The Ajax proxy attempted to connect to the requested URL and received an error condition in response. This error condition can result when the requested URL is not available. Check the trace log files for additional information.

User response

Check the trace log files for additional information.

BMWPX0013W

The Ajax proxy is configured to connect to any security authentication realm.

Explanation

The Ajax proxy servlet has received a 407 HTTP challenge from another proxy server. This HTTP challenge lists the security realm with which the Ajax proxy servlet is attempting to authenticate. If a passthru_realm parameter is not included in the proxy-config.xml file, the Ajax proxy servlet authenticates with any security realm in response to a 407 HTTP challenge.

User response

Edit the proxy-config.xml file, which is used to configure the Ajax proxy servlet. Include the passthru_realm security realm value to which the Ajax proxy servlet is expected to authenticate.

BMWPX0014I

The Ajax proxy servlet is configured to connect to {0} as pass-thru proxy host using port {1}.

Explanation

This informational message indicates that the Ajax proxy servlet is configured to connect to another proxy server. When the Ajax proxy servlet receives an HTTP request, the request is passed to the pass-through proxy server. This pass-through proxy server might be a border firewall proxy server that the Ajax proxy servlet needs to connect through before accessing the outside network.

User response

No user action is required.

BMWPX0015E

The passthru_proxyport parameter in the proxy-config.xml file accepts only numeric values.

Explanation

The passthru_port parameter in the proxy-config.xml file received an incorrect value, which resulted in NumberFormatException.

User response

Edit the proxy-config.xml file for the Ajax proxy servlet and check the value for the passthru_port parameter. This error might result if a non-numeric value is used for the passthru_port parameter value.

BMWPX0016E

The Ajax proxy servlet is not configured correctly to use a pass-through proxy server to access the network.

Explanation

Parameters are missing from the Ajax proxy servlet configuration to use a pass-through proxy server when connecting to the network. At a minimum, the Ajax proxy servlet requires the proxy passthru_host, passthru_username, and passthru_password parameter values. The information is used to create a response to a 407 HTTP challenge that the pass-through proxy server might present to the Ajax proxy servlet.

User response

Edit the proxy-config.xml file to include the passthru_host, passthru_username, and passthru_password parameter values.

BMWPX0017E

The Secure Socket Layer (SSL) certificate of the target host is not trusted.

Explanation

The user attempted to connect to a secured target host (HTTPS) that contained an SSL certificate that was not trusted by the server where the Ajax proxy servlet is running. This situation typically occurs for unsigned or self-signed certificates that were not issued by a trusted Certification Authority (CA).

User response

Either import the certificate of the target server into the trust store of your local servers, or or enable unsigned SSL certificates by adding a meta-data entry unsigned_ssl_certificate_support with a value of true in your proxy-config.xml file.

BMWPX0018E

The specified IP address of the target host is prohibited by rule.

Explanation

The user tried to access a target host using an IP-address that is prohibited by a rule within the proxy-config.xml file.

User response

If the user should be able to access the specified target host, the administrator must remove the IP address of the host from the black list in proxy-config.xml.

BMWPX0019W

The authentication scheme '{0}' provided by the remote server is not supported by the Ajax proxy.

Explanation

The remote server sent a 401 error using an unknown scheme in the authentication challenge.

User response

If authentication does not work, contact the administrator of the remote server and request alternative authentication methods.

BMWPX0020E

The specified target host is unknown.

Explanation

The specified target host cannot be resolved by the Ajax proxy.

User response

If the target host cannot be resolved, contact the administrator.

BMWPX0021E

The specified passthru proxy type is not supported.

Explanation

The type of the passthru proxy that was configured for the Ajax Proxy is not supported.

User response

Configure a passthru proxy with a supported type, or change the configuration of the specified passthru proxy to provide the supported passthru proxy type.

BMWPX0022E

Unable to authenticate to the passthru proxy. Invalid realm {0}.

Explanation

The realm returned by the passthru proxy is different than the one specified in the Ajax proxy configuration.

User response

Configure the realm of the passthru proxy correctly or skip the realm configuration parameter to allow any realm.

EJCBA: com.ibm.portal.rest.userprofile.resources.UserProfileRESTServiceMessages

EJCBA0001E

The input profile provided does not define a type at all or an invalid type.

Explanation

The profile structure defines a mandatory type attribute with a limited set of allowed values that has to be set correctly.

User response

Set a valid type attribute for the profile element.

EJCBA0002E

The attribute name is not specified.

Explanation

The attribute element requires a name attribute to be set.

User response

Set the name attribute for the attribute element.

EJCBA0003E

The attribute representing the short name for a new profile is not set.

Explanation

The short name has to be set to create a new profile.

User response

Set a value for the attribute representing the short name.

EJCBA0004E

The input profile does not define attributes.

Explanation

The input profile is either empty or semantically incorrect.

User response

Provide an input profile with at least one attribute.

EJCBA0005E

The value set for request parameter {0} is not supported.

Explanation

The current request defines a parameter value that is not valid.

User response

Replace the current value for the parameter with a valid one.

EJCBA0006E

The extension {0} does not implement the com.ibm.portal.rest.userprofile.io.UserProfileRESTServiceIOHandler interface.

Explanation

All extensions of the com.ibm.portal.rest.userprofile.IOHandler extension point must implement the interface com.ibm.portal.rest.userprofile.io.UserProfileRESTServiceIOHandler.

User response

Make sure all extensions do implement the interface.

EJCBA0007E

The URI {0} is not defined for the User Profile REST service.

Explanation

The client performed a request to a URI that is not defined in the User Profile REST interface.

User response

Use one of the URIs defined in the User Profile REST service interface documentation.

EJCBA0008E

The request method {0} is not defined for the URI {1}.

Explanation

The client performed a request with a URI/request method pair that is not defined in the User Profile REST interface.

User response

Use one of the supported URI/request method combinations defined in the User Profile REST service interface documentation.

EJCBA0009E

The attribute {0} is not defined in the underlying user repository.

Explanation

The client referenced an attribute that is not defined.

User response

Make sure that only defined attributes are used.

EJCBA0010E

The request has been triggered in an anonymous context although authentication is required.

Explanation

The current operation requires user authentication to be performed.

User response

Make sure that this operation is only triggered in a valid user context.

EJCBA0011E

The attribute value {0} is not valid for this type of attribute.

Explanation

The service implementation expects a different representation of this value.

User response

Check the documentation for valid values for particular attributes.

EJCBA0012E

There is more than one extension defined as default for input and output handling.

Explanation

There must be only one extension that claims to be the default input and output handler.

User response

Make sure that only on extension defines to be the default handler.

EJCBA0013E

The extension {0} does not define a mime type.

Explanation

All extensions of the com.ibm.portal.rest.userprofile.IOHandler extension point must define a mimeType attribute.

User response

Make sure that the extension defines a mimeType attribute.

EJCBA0014W

The mime type {0} is defined for more than one extension. It is not deterministic which implementation will be used.

Explanation

There is more than one extension of the com.ibm.portal.rest.userprofile.IOHandler extension point defined for the mime type.

User response

Make sure that there is only one extension per mime type.

EJCBB: com.ibm.wps.resolver.operations.resources.OperationMessages

EJCBB0000E

The operation factory {0} cannot create the requested operation due to an internal error.

Explanation

The addressed operation cannot be created due to an internal error.

User response

Look into the log files for exceptions.

EJCBB0001E

The operation factory {0} cannot create the requested operation because the operation is not applicable to the resource addressed via the URI {1}.

Explanation

The operation cannot be applied to the addressed resource. The operation expects a different resource type.

User response

Make sure the operation is only applied to resources it can process.

EJCBB0002E

The operation factory {0} cannot create the requested operation because the resource with URI {1} does not seem to be part of an application.

Explanation

The operation cannot be applied to the addressed resource. The operation expects a the resource to be part of an application.

User response

Make sure the operation is only applied to resources that are part of applications.

EJCBB0003E

The operation factory for operation ID {0} cannot be found.

Explanation

There is no operation factory registered for the addressed operation ID.

User response

Make sure the operation factory is registered for the correct operation ID in plugin.xml.

EJCBC: com.ibm.portal.resolver.resources.WpResolverApiMessages

EJCBC0000E

{0}

Explanation

This is a generic error message, holding system-supplied text. It is issued when an unexpected condition is encountered, which is not handled by any specific error-handling code. The message text from the lower-level component should contain an error description. There may also be further information in the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one). If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBC0001E

The service handler [{0}] associated with the URI [{1}] could not be located using the COR APIs.

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one). If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBC0002E

The service [{0}] could not be located.

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one). If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBC0003E

The URI [{1}] does not contain the expected URI scheme [{0}].

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one). If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBC0004E

The token [{0}] is not contained in the URI [{1}].

Explanation

This indicates that the listed URI is missing a required token. The missing token name is also given. This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one). If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBC0005E

An IO-Exception occurred during the resolution process.

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one). If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBC0006E

A URISyntaxException occurred during the resolution process for URI [{0}]. The causing exception reported: [{1}].

Explanation

This indicates a syntax error during parsing the referenced URI string. For more details about this specific error, please see the nested exception as well as the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one). If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBC0007E

A service of type [{1}] could not be created from the service handler [{0}] for the URI [{2}].

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one). If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBC0008E

Access control check to the requested resource failed.

Explanation

This indicates that the user does not have sufficient access permissions to a resource. This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

First determine the resource which was requested. Then determine what access rights the user has, and compare to what is required. Grant the user the necessary permissions. This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one). If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBC0009E

The entity [{0}] could not be be found.

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one). If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBC0010E

The entity [{0}] was deleted.

Explanation

The referenced entity has been removed from the system. This would indicate that it has been marked for soft delete but not yet cleaned up.This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one). If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBC0011E

A timeout occurred when trying to access the resource.

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one). If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBC0012E

The parameter [{0}] is invalid.

Explanation

This indicates a syntax error. The input parameter referenced is not valid. This may be simply a typographical error. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one). If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD: com.ibm.wps.resolver.cor.resources.WpResolverCorImplMessages

EJCBD7000E

The URI [{0}] does not contain a scheme component.

Explanation

An URI is defined as <scheme>:<scheme-specific-part> (for example: http://host..). The URI in this message does not have a scheme defined. The scheme in an URI is a required component that is missing in this URI.

User response

To be able to correct the URI you may need to find out where it is coming from and which code is generating the URI. To help with this you can enable traces for the RequestResponseLogger (<code>com.ibm.wps.logging.resolver.RequestResponseLogger=all</code>) which might help you to identify the source of the URI.

EJCBD: com.ibm.wps.resolver.resources.WpResolverImplMessages

EJCBD0000E

{0}

Explanation

This is a generic error message, holding system-supplied text. It is issued when an unexpected condition is encountered, which is not handled by any specific error-handling code. The message text from the lower-level component should contain an error description. There may also be further information in the message body of the HTTP response.

User response

Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0001E

The binding "{0}" is not supported.

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0002E

An error occurred during access to the COR.

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0003E

The object "{1}" is not of the expected type "{0}".

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0004E

The string "{0}" is syntactially not a URI. Parsing failed at position "{1}" due to: {2}

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0005E

The parameter "{0}" is not available.

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0006E

The resolution of a URI failed. Refer to the SystemOut.log for more detailed information.

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0007E

The request [{1}] and response [{2}] do not contain enough information to perform the content resolution. Only partial information could be decoded: {0}.

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0008E

An error occurred during determination of the uniqueness of the friendly URL name.

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0009E

The friendly name you have chosen is already in use.

Explanation

This message indicates that an attempt was made to re-use a friendly name that has already been used within the system. Friendly names must be unique.

User response

Choose a friendly name that is not currently in use. If you believe the name should not be in use, use the administrative tools to examine the friendly names that are currently defined, and delete the existing definition if necessary.

EJCBD0010E

A data source factory registered for any of these service handlers [{0}] could not be found for the URI [{1}] using the COR APIs.

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0011E

The content-type string [{0}] could not be parsed according to RFC822 or MIME standards.

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0012E

The content-type is missing in the data source.

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0013E

The content-type string [{0}] does not contain the required [{1}] parameter. A correct example should look like this: [{2}].

Explanation

This message indicates that a required parameter was not present. An example of a correct parameter usage is given.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0014E

An error occured during closing the SSL connection.

Explanation

There was an error writing the closing data of an SSL connection.

User response

See the nested exception for more details on the actual reason.

EJCBD0015E

The primary content-type string [{0}] does not match the expected type [{1}].

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0016E

The sub content-type string [{0}] does not match the expected type [{1}].

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0017E

The content-type string [{0}] does not match the expected type [{1}].

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0018E

The boundary token is missing in the content-type string.

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0019E

The data source identified by the URI [{0}] and parameters [{1}] could not be processed: [{2}]

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0020E

The data source implemented by [{0}] cannot be converted to the interface [{1}]. URI [{2}] and parameters [{3}].

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0021E

The URI [{0}] and parameters [{1}] could not be processed: [{2}]

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0022E

Access to the URL [{0}] resulted in status code [{1}] and the message [{2}].

Explanation

This error can be triggered for a number of reasons. For more details about this specific error, please see the message body of the HTTP response.

User response

This problem is often encountered while developing code using the REST APIs. The fix will require correcting the application which is using these APIs. Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBD0023E

The data source [{0}] addressed via URI [{1}] must not be accessed because the Portal is configured to enforce friendly URL prefixes for every URL that is used to load markup.

Explanation

This error can be triggered by data sources that are used to produce markup of portal resources. Since the resolver framework does not have the capability to enforce friendly URL prefixes in the incoming URLs, the request to use this data source is denied.

User response

Please check if the friendly URL prefix enforcement can be disabled. In order to disable it, set the configuration setting "friendly.redirect.enabled" in the resource environment provider "WP ConfigService" back to "false" and restart your Portal. If this error occurs in the context of a portal page that is rendered client-side, you need to switch to server-side rendering mode via the "Edit Page Properties" administration portlet.

EJCBE: com.ibm.portal.resolver.cai.resources.WpResolverCaiApiMessages

EJCBE0000E

{0}

Explanation

This is a generic error message, holding system-supplied text. It is issued when an unexpected condition is encountered, which is not handled by any specific error-handling code. The message text from the lower-level component should contain an error description. There may also be further information in the message body of the HTTP response.

User response

Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBE0001E

The CAI business component with the associated URI "{0}" could not be located.

Explanation

The business component which is referenced by the URI could not be resolved. It might have been deleted or the user has insufficient access rights.

User response

Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If possible, correct the URI to refer to an existing CAI business component. If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBF: com.ibm.wps.resolver.cai.resources.WpResolverCaiImplMessages

EJCBF0000E

{0}

Explanation

This is a generic error message, holding system-supplied text. It is issued when an unexpected condition is encountered, which is not handled by any specific error-handling code. The message text from the lower-level component should contain an error description. There may also be further information in the message body of the HTTP response.

User response

Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBF0001E

The CAI business component with the ID "{0}" and JNDI name "{1}" could not be located.

Explanation

The given URI refers to a business component that could not be found in Portal.

User response

Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBF0002E

An object of type "{0}" that corresponds to the object ID "{1}" could not be located.

Explanation

An object with the given ID and type could not be found in Portal.

User response

Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBF0003E

A page containing a portlet with the objectID "{0}" could not be located.

Explanation

The URI resolution code tried to find a page that contains a specific portlet. However no such page was found in Portal.

User response

Check the Portal SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBF0004E

A service lookup failed for JNDI name "{0}".

Explanation

A service lookup failed.

User response

Check the Portal SystemOut.log or SystemErr.log for additional information about the error. The service name may be incorrect, or the service may not have started at server startup because of an error. If the SystemOut.log or SystemErr.log contains entries indicating timestamped FFDC log entries were generated, also review those FFDC log entries (there may be more than one).If the code encountering the error is not supplied by IBM, contact the code vendor or local developer as appropriate. If the code encountering this error is supplied by IBM, contact IBM support to open a problem report. Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJCBG: com.ibm.wps.resolver.webdav.resources.WebdavMessages

EJCBG0001E

Item [{0}] must be a collection.

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0002E

Unable to create a new collection of type [{0}] for the context [{1}].

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0003E

Unable to confirm the creation of type [{0}] for the context [{1}].

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0004E

Unable to create a new item of type [{0}] for the context [{1}].

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0005E

Unable to create a creation context for [{0}] inside the collection [{1}].

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0006E

Unable to confirm the insertion of item [{0}] in the collection [{1}].

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0007E

Unable to create a modifiable object for item [{0}].

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0008E

Unable to resolve item [{0}].

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0009E

The resolution of URI [{0}] and parameters [{1}] failed.

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0010E

Unable to update the item [{0}].

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0011E

Unable to create command [{0}] from the factory [{1}].

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0012E

The requested lock on resource [{0}] cannot be enforced.

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0013E

The requested lock on resource [{0}] cannot be granted, because the resource is already locked.

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0014E

The Lock-Token header is missing in the parameters [{0}].

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0015E

The requested unlock operation on resource [{0}] cannot be enforced.

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0016E

The requested unlock operation on resource [{0}] failed for lock [{1}].

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0017E

Expected token [{2}] in the data stream [{0}] at position [{1}].

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0018E

The item [{0}] could not be found.

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0019E

The item [{0}] could not be deleted because it could not be found.

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0020E

The item [{0}] already exists.

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0021E

The message body could not be parsed at line [{0}] and column [{1}].

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0022E

The COPY operation is not supported for [{0}] and the associated model [{1}].

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0023E

Unable to confirm the deletion of item [{0}].

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0024E

The destination of the operation already exists [{0}].

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0025E

Unable to perform the operation because source and target are the same [{0}].

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0026E

The destination of the operation is missing.

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJCBG0027E

The form-upload part is missing for the multipart/form-data request.

Explanation

This message indicates a problem with the execution of a Portal Resolver WebDAV command, probably caused by incorrect API usage. If it is not immediately obvious which command has failed, recreate the problem with the following trace string: [ com.ibm.wps.resolver.webdav.*=all ] to see which command is failing and what parameters the command is receiving.

User response

If the incorrect API usage is from non-IBM code, if possible correct the usage of the Portal Resolver WebDAV command API by contacting the developer or vendor. If the incorrect API usage is from IBM-supplied code, contact IBM support to open a problem report.

EJPAB: com.ibm.wps.portlets.admin.resources.AdminMessages

EJPAB0001E

No resource type or searchable class specified, the tag may be missing some required attributes

Explanation

The search component in this portlet does not seem to be configured properly.

User response

Correction of the condition is required.

EJPAB0002E

No searchable instance found or can be created

Explanation

The portlet search component stores information in the session and/or request. If it cannot be found it tries to create it and then store it in the session/request. This situation could occur if the portlet has been placed on and unauthenticated page, in which case there is no session.

User response

Move the portlet to an authenticated page and/or ensure that sessions are enabled.

EJPAB0003E

No condition found

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0004E

Search condition option is not valid

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0005E

Condition can not be chosen

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0006E

The input entry can not be empty

Explanation

A search cannot be performed without valid input.

User response

Specify a value for which to search.

EJPAB0007E

Entered data is not valid

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0008E

Number of search results is over the maximum limit of search engine allowed items.

Explanation

For performance reasons, the search engine has been configured to not return very large result sets.

User response

Enter a more specific search query that will return fewer results.

EJPAB0009I

No results were found from the search query condition.

Explanation

No results matched your search. If you expected to find matching results, it is possible that results do exist in portal, but you do not have access to view those resources, so they were not returned.

User response

Check your search query for spelling mistakes, or enter a more general query condition.

EJPAB0010E

No results were found because of an internal error in the SearchableManager.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0011E

An error has occurred, please click "Done" button to leave the page.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0012E

You do not have appropriate access rights to do the action. Please contact your administrator.

Explanation

You have attempted an action for which you do not have sufficient permissions. Your administrator must grant you the needed permissions before you can execute this action.

User response

Contact your administrator.

EJPAB0013E

ISCHelp class was not found, Help for an administration portlet in Integrated Solutions Console cannot be displayed.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0014E

Runtime Exception is thrown in static initializer, Help for an administration portlet in Integrated Solutions Console cannot be displayed.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0015E

Runtime Exception is thrown in constructor, Help for an administration portlet in Integrated Solutions Console cannot be displayed.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0016E

A class on which the targeted class depends is not found, Help for an administration portlet in Integrated Solutions Console cannot be displayed.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0017E

Unknown Error occurred, Help for an administration portlet in Integrated Solutions Console cannot be displayed.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0018E

Targeted Method AdminPortlethelp() not found, Help for an administration portlet in Integrated Solutions Console cannot be displayed.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0019E

Illegal access exception, Help for an administration portlet in Integrated Solutions Console cannot be displayed.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0020E

Method invocation error, Help for an administration portlet in Integrated Solutions Console cannot be displayed.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0021E

Instantiating error, Help for an administration portlet in Integrated Solutions Console cannot be displayed.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0030E

Action failed because of an internal error.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0031E

Title is too long, max length is {0}.

Explanation

You have entered more characters than can be stored for the title.

User response

Enter a title within the allowed number of characters.

EJPAB0032E

Title is empty.

Explanation

The title cannot be empty.

User response

Specify a title.

EJPAB0033E

Description is empty.

Explanation

The description cannot be empty.

User response

Enter a description.

EJPAB0034E

Class {0} can not be found.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0035E

Resource object id can not be found.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0036E

Failed to create ResourceLocalizedInfo class.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0037E

Failed to find ResourceLocalizedInfo class scope {0} scoped {1}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0038E

Resource object id is not provided.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0039E

Failed to get default locale for this resource.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAB0040E

This portlet requires a portal server that is at least version {0}. The portal server is currently version {1}.

Explanation

This portlet is incompatible with this version of the portal server.

User response

Uninstall this portlet. Check with the author of the portlet to see if a version is available that is compatible with this version of WebSphere Portal.

EJPAB0050E

The AdminNavHelper was not found on the request. This portlet requires that the AdminNavHelper tag be present in the theme in order to be displayed.

Explanation

The AdminNavHelper tag facilitates advanced functionality between multiple administration portlets. If this tag is removed or not included in a theme, the theme may break, and some administration portlets will fail.

User response

Add the AdminNavHelper tag to the theme. Look in the default theme shipped with WebSphere Portal for the specific code to add.

EJPAB0051E

Description is too long, max length is {0}.

Explanation

You have entered more characters than can be stored for the description.

User response

Enter a description within the allowed number of characters.

EJPAB0060E

The launch context information was not found on the request. This portlet requires launching context information being presented in request parameters.

Explanation

The launching context information contained in request parameters must be set by launching portlet or theme

User response

Correction of the condition is required.

EJPAC: com.ibm.wps.portlets.appearance.resources.AppearanceMessages

EJPAC0001E

Datastore access error.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact administrator.

EJPAC0002E

Unable to set new skin.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact administrator.

EJPAC0003E

Failed to delete page.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact administrator.

EJPAC0004E

There is no page selected.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is no page to edit with. Please click done button to leave.

EJPAC0010E

You do not have authority to change the skin on portlet {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Please contact portal administrator to give the authority to change the portlet skin.

EJPAC0100I

Skin updated on portlet {0}.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAC0101I

Page successfully deleted.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAC0102I

You can not change portlet skin on the static page.

Explanation

This is an information message. The portal system cannot change portlet skin for the portlet on the static page.

User response

Please click done button to leave.

EJPAD: com.ibm.wps.portlets.client.resources.ClientManagerMessages

EJPAD0001E

The client name must not contain spaces only.

Explanation

A name consisting of spaces only is not a valid client name.

User response

Enter more than spaces for the client name.

EJPAD0002E

No clients defined.

Explanation

Clients must be defined in order to display a list.

User response

Create clients.

EJPAD0003I

The client {0} has been created successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAD0004I

The client has been deleted successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAD0005I

The client {0} has been modified.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAD0006I

The client {0} has been moved successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAD0007E

No client has been selected.

Explanation

A client must be selected before this action can be done.

User response

Select a client and then continue.

EJPAD0008E

Required data missing.

Explanation

Data needed in order to process this action is missing.

User response

Enter the data necessary in order to continue.

EJPAD0009E

The selected client does not exist.

Explanation

The selected client does not exist. Another user may have already deleted this client.

User response

Log off and back on to generate a new client list.

EJPAD0010E

An application error occurred. View the log for details.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

View the log for more information and/or contact your system administrator.

EJPAD0011E

The client {0} could not be reordered.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAD0012E

The client with the ID {0} could not be found.

Explanation

The selected client can not be found. It may have been deleted by another user.

User response

Log off and back on. If the problem is not corrected, contact your system administrator.

EJPAD0013E

The client could not be created.

Explanation

A client can not currently be created.

User response

Log off and back on. If the problem is not fixed, contact your system administrator.

EJPAD0014E

The client could not be set to the desired position.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAD0015E

The client {0} could not be modified.

Explanation

The client selected can not be modified. Another user may have deleted this client.

User response

Log off and back on to verify the client still exists. Retry the action. If it does not work, contact your system administrator.

EJPAD0016E

The client {0} could not be deleted.

Explanation

The client selected can not be deleted. Another user may have deleted this client.

User response

Log off and back on to generate a new listing. If the problem is not fixed, contact your system administrator.

EJPAD0017E

An exception occurred.

Explanation

This is a general error message. The log will contain more information.

User response

View the log for more details.

EJPAD0018E

Unable to query the client list.

Explanation

Currently a query of the client list can not be performed.

User response

Log off and back on. If the problem still exists, contact your system administrator.

EJPAD0019E

The client {0} already exists.

Explanation

The client you wish to add is already in the client list.

User response

Enter a new client.

EJPAD0020W

Are you sure you want to delete the selected client?

Explanation

Verification that this is the correct client to delete.

User response

Verify that this is the client you want to delete.

EJPAD0021E

The client you tried to order before or after does not exist.

Explanation

The client you wanted to order before or after has been deleted.

User response

No action is required.

EJPAE: com.ibm.wps.portlets.contentlayout.resources.ContentLayoutMessages

EJPAE0001E

Failed to move portlet left.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0002E

Failed to move portlet right.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0003E

Failed to move portlet up.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0004E

Failed to move portlet down.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0005E

Failed to delete portlet.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0006E

Failed to transfer all portlets.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0007E

Failed to add row container.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0008E

Failed to add column container.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0009E

Failed to move container left.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0010E

Failed to move container right.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0011E

Failed to move container up.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0012E

Failed to move container down.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0013E

Failed to set container width.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0014E

Failed to delete container.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0015E

Failed to add new portlets.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0016E

Failed to move content and layout to a new container.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0017E

Failed to switch layout.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0018E

Failed to delete this page.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0019E

Failed to search for portlets.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0020E

There is no page selected.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0021E

The value you entered is not a number, please enter a valid number.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0022E

This page is not ready to be customized. You administrator must finish properly setting up this page before it will be available for customization. Please contact your administrator.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0023E

Failed to select portlet rule.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0024E

Failed to deselect portlet rule.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0025E

Failed to list portlets.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0026E

Failed to end solo action.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAE0027E

The unique name was not changed because of an internal API failure.

Explanation

The unique name was not changed because of an internal API failure.

User response

Correction of the condition is required.

EJPAE0028E

The unique name was not changed because the one you entered was not unique.

Explanation

The unique name was not changed because because the one you entered was not unique. Each custom unique name must be unique across the portal.

User response

Please choose a unique name for this resource that is not duplicated within the system.

EJPAE0029E

The unique name was not changed because there was a data backend exception.

Explanation

These was an error communicating with the backend database.

User response

Please try the request again. If you are still unsuccessful, please check that the database server is running properly and the portal system has proper access rights.

EJPAE0101I

Portlet is moved to left successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAE0102I

Portlet is moved to right successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAE0103I

Portlet is moved up successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAE0104I

Portlet is moved down successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAE0105I

Portlet is deleted from this page.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAE0106I

All portlets are transferred successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAE0107I

New row container is added successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAE0108I

New column container is added successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAE0109I

Container is moved to left successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAE0110I

Container is moved to right successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAE0111I

Container is moved up successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAE0112I

Container is moved down successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAE0113I

Container width is set successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAE0114I

Container is deleted successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAE0115I

New portlets are added successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAE0116I

Content and layout is added to a new container.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAE0117I

Layout is switched successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAE0118I

Page successfully deleted.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAE0119I

The unique name was changed successfully.

Explanation

The unique name was changed successfully.

User response

No action is required.

EJPAE0120I

The unique name was removed successfully.

Explanation

The unique name was removed successfully.

User response

No action is required.

EJPAF: com.ibm.wps.portlets.frequentusers.resources.FrequentUsersMessages

EJPAF0001E

CountActiveUsersCommand failed.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAG: com.ibm.wps.portlets.importxml.resources.ImportXMLMessages

EJPAG1001E

Could not find the selected file, or lost track of the selected file from the browse button. Please try again.

Explanation

This is an error message. The file you selected was lost during the import process.

User response

Please re-select an XML file to import.

EJPAG1002E

Internal error in portlet. Could not find the form data. Please contact your administrator.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAG1004E

Could not process the selected file from the browse button as a XML file. Please make sure it is a XML file and try again.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAG1005E

There was an exception when trying to retrieve the selected file from the Browse button. Please try again.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAG1006E

There was an exception when trying to import the selected XML file. Please make sure it is a valid XML file and try again.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAG1008I

The XMLAccess ran successfully please click the View Details link to view the output.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAG1009I

Results from XMLAccess: {0}

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAG1010I

The XMLAccess resulted with no output.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAG1011I

You do not have the correct permissions to import an XML configuration file.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

Please edit your permissions in order to access this portlet.

EJPAG1012E

XML file {0} failed to import.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAG9400E

Internal exception in struts.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAG9401E

Internal error in struts.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAH: com.ibm.wps.portlets.managevirtualportals.resources.ManagevirtualportalsMessages

EJPAH1100W

Unknown struts error was encountered.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAH2000E

Please specify the realm.

Explanation

This is an error message. The portal system cannot create a new virtual portal.

User response

Please select a realm.

EJPAH2001E

This is not a valid realm.

Explanation

This is an error message. The portal system cannot create a new virtual portal.

User response

Please select a valid realm name.

EJPAH2003E

Please specify the virtual portal title.

Explanation

This is an error message. The portal system cannot perform the action.

User response

Please enter a virtual portal title.

EJPAH2004E

Please specify the virtual portal description.

Explanation

This is an error message. The portal system cannot perform the action.

User response

Please enter a virtual portal description.

EJPAH2005E

Please specify the url context.

Explanation

This is an error message. The portal system cannot create a new virtual portal.

User response

Please enter a url context label for this virtual portal.

EJPAH2006E

Label {0} is already in use in this Context.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Please enter a different label.

EJPAH2007E

Label {0} is already in use in Context {1}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Please enter a different label.

EJPAH2008E

Labels cannot be longer than 255 characters.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Please enter a short label name.

EJPAH2009E

Invalid characters were found in a context name or label: {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Please enter a label with valid characters.

EJPAH2010E

Failed to create virtual portal.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator for details.

EJPAH2011I

Virtual portal {0} has been created successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAH2012E

Can not find xmlaccess script {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAH2013E

Failed to execute xmlaccess script.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAH2014E

This User group does not exist, please select another one.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Please select a user group that exists.

EJPAH2015E

Failed to assign {0} administrator role to virtual portal root label {1}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator for details.

EJPAH2016E

Failed to assign {0} administrator role to virtual portal url context.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator for details.

EJPAH2017E

Failed to assign theme to virtual portal root label.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator for details.

EJPAH2018E

Failed to assign {0} {1} role to portlets list.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator for details.

EJPAH2019E

Failed to create virtual portal object.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator for details.

EJPAH2020E

Please specify the hostname.

Explanation

This is an error message. The portal system cannot create a new virtual portal.

User response

Please enter a hostname for this virtual portal.

EJPAH2021E

Hostname {0} is already in use.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Please enter a different hostname.

EJPAH2022E

Hostname {0} is already in use in {1}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Please enter a different hostname.

EJPAH2023E

Hostname cannot be longer than 255 characters.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Please enter a short Hostname.

EJPAH2024E

Invalid characters were found in a hostname: {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Please enter a hostname with valid characters.

EJPAH2025E

Hostname {0} is already used in default virtualportal.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Please enter a different hostname.

EJPAH2026E

Failed to assign {0} ADMIN role to Template root folder or EDITOR role to virtual resource TEMPLATE DEPLOYMENT.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator for details.

EJPAH2101E

Too many matches found. Please refine your search criteria.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAH2200E

Failed to change theme.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAH3000E

Failed to edit virtual portal {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAH3001I

Virtual Portal {0} has been edited successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAH3100E

Failed to get titles and descriptions for this virtual portal.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAH3101E

Failed to save language-specific titles and descriptions for this virtual portal.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAH3102E

Failed to edit language-specific titles and descriptions for this language.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAH3103I

Language-specific titles and descriptions for virtual portal {0} have been set successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAH3104I

Language-specific title and description for language {0} have been set successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAH3105E

Failed to update title and description.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAH3106I

Language-specific title and description for language {0} have been deleted successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAH3107E

Failed to delete language-specific titles and descriptions for language {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAH4000E

Failed to delete virtual portal {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAH4001I

Virtual portal {0} has been deleted successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAH5000E

Failed to initialize virtual portal {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAH5001I

Virtual portal {0} has been initialized successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAH5002E

Failed to initialize virtual portal.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAH6000E

A positive integer is required for field {0}. Saving of configuration data failed.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Please enter a positive integer.

EJPAH6001E

A positive integer is required for field {0}. Saving of edited data failed.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Please enter a positive integer.

EJPAH6002E

A valid xml script file name is required. Saving of configuration data failed.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Please enter a valid file name.

EJPAH6003E

A valid xml script file name is required. Saving of configuration data failed.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Please enter a valid file name.

EJPAH7000E

There is an internal error.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

There is an internal error. Please contact portal administrator.

EJPAI: com.ibm.wps.portlets.managelog.resources.ManageLogMessages

EJPAI0001I

The settings were set.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAI0002I

The settings were removed.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAI0003I

Nothing was selected to be removed.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAI0004E

Some settings were not set correctly.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAI0005E

Some settings were not removed correctly.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAI0006E

The Log Manager is not available.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAI0007E

The Log Manager configuration is not available.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAJ: com.ibm.wps.portlets.managepages.resources.ManagepagesMessages

EJPAJ0001I

{0} and all pages below it have been successfully deleted.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAJ0002E

You are not authorized to delete {0}. Please contact your administrator.

Explanation

The user does not have the Manager user role on the page.

User response

Add user to Manager user role on the page.

EJPAJ0003I

{0} and {1} have been successfully swapped.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAJ0004E

You are not authorized to swap {0} and {1}. Please contact your administrator.

Explanation

The user does not have the Editor user role on the parent page of these two pages.

User response

Add user to Editor user role on the parent page of these two pages.

EJPAJ0005I

{0} has been successfully added.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAJ0006E

You are not authorized to create a child page for {0}. Please contact your administrator.

Explanation

The user does not have the Editor user role on the page to create a shared child page, or the Privileged user role on the page to create a private child page.

User response

Add user to the Editor user role on the page to create a shared child page or the Privileged user role on the page to create a private child page.

EJPAJ0007E

The parent page does not exist.

Explanation

The parent page has been deleted by another user.

User response

Select another page as parent page.

EJPAJ0008E

The selected page does not exist.

Explanation

The selected page has been deleted by another user.

User response

Select another page.

EJPAJ0009E

Unable to swap {0} and {1}.

Explanation

The two pages may have been swapped by another user..

User response

Refresh the page table by clicking on a page title link or starting a new search.

EJPAJ0010E

Unable to delete {0}.

Explanation

The selected page may have been deleted by another user.

User response

Refresh the page table by clicking on a page title link or starting a new search.

EJPAJ0011E

Unable to activate {0}.

Explanation

The page may have been activated by another user.

User response

Refresh the page table by clicking on a page title link or starting a new search.

EJPAJ0012I

{0} has been successfully activated.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAJ0013E

Unable to deactivate {0}.

Explanation

The page may have been deactivated by another user.

User response

Refresh the page table by clicking on a page title link or starting a new search.

EJPAJ0014I

{0} has been successfully deactivated.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAJ0015E

Unable to create a new page.

Explanation

The page may have been modified by another user.

User response

Refresh the page table by clicking a page title link or starting a new search.

EJPAJ0016E

Unable to edit {0}.

Explanation

The page may have been modified by another user.

User response

Refresh the page table by clicking a page title link or starting a new search..

EJPAJ0017I

{0} has been edited successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAJ0018E

Enter a positive integer for field {0}. Configured data was not saved.

Explanation

The field only takes positive integer.

User response

Enter a positive integer for the field.

EJPAJ0019E

Enter a positive integer for field {0}. Edited data was not saved.

Explanation

The field only takes positive integer.

User response

Enter a positive integer for the field.

EJPAJ0020I

No pages are found using this search pattern. Please specify another search pattern.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAJ0021E

Failed to retrieve pages.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAJ0022E

You are not authorized to perform this action. Please contact your administrator.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAJ0023I

{0} is ready to be moved.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAJ0024E

Failed to mark {0}.

Explanation

The page may have been modified by another user.

User response

Refresh the page table by clicking on a page title link or starting a new search.

EJPAJ0025I

{0} was successfully moved to location {1}.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAJ0026E

Could not move {0} to location {1}.

Explanation

The page or the new parent page may have been modified by another user.

User response

Marking the page and moving it again.

EJPAJ0027I

{0} is successfully exported.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAJ0028I

{0} and its sub pages are successfully exported.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAJ0029E

Could not export {0}.

Explanation

The page may have been modified by another user.

User response

Refresh the page table by clicking on a page title link or starting a new search.

EJPAJ0030E

Could not export {0} and its sub pages.

Explanation

The page may have been modified by another user.

User response

Refresh the page table by clicking on a page title link or starting a new search.

EJPAJ0031E

The marked page has been deleted.

Explanation

The marked page has been deleted by another user.

User response

Mark another page.

EJPAJ0032E

The parent page has been deleted.

Explanation

The parent page has been deleted by another user.

User response

Select another page as parent page.

EJPAJ0033I

{0} and its sub pages are ready to be moved.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAJ0035E

Application Layout portlet is launched with no application ID.

Explanation

Application ID must be passed and valid when Application Layout portlet is launched.

User response

Make sure the Application exists.

EJPAJ0040E

Unable to refresh {0}.

Explanation

The page may be invalid.

User response

Refresh the page table by clicking on a page title link or starting a new search.

EJPAJ0045I

{0} has been successfully refreshed.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAK: com.ibm.wps.portlets.login.resources.LoginMessages

EJPAK0001W

Please enter a valid password.

Explanation

Either there was no password entered or the password entered is invalid.

User response

You must enter a valid password in order to log in to the portal.

EJPAK0002W

Please enter a valid user ID.

Explanation

There was no user ID entered.

User response

You must enter a valid user ID in order to log in to the portal.

EJPAK0003W

Please enter a valid user ID and password.

Explanation

There was no user ID and password entered.

User response

You must enter a valid user ID and password in order to log in to the portal.

EJPAK0004W

Login failed. Please enter a valid user ID and password.

Explanation

This error message indicates that there was an error while attempting to login the user. Possible reasons of failure are: Reason 1. User does not exist in the system. Reason 2. Password is not valid. Reason 3. If configured with LDAP, user doesn't exist in LDAP. Other possible reasons of failure (less likely, but have been encountered in the past) are: 1. DN longer than a database table column limit (default 255 chars). 2. Failure occurred in configuration steps during install to set the password. 3. User credentials changed after Virtual Portal creation causing the login failure on Virtual portal. 4. Using WebSEAL and changed the user information during a user session.

User response

Try one or more of the following actions. For reason 1: When user id is not valid, you might find the following exception in the log. com.ibm.wps.services.authentication.exceptions.WASAuthenticationFailedException: EJPSD0001E: Authentication against WebSphere Application Server failed for user <user ID>. If you are a non-admin user, contact your administrator to check whether the user id you are using exists in the system. If you are the administrator, make sure you are entering the right id created during install. For reason 2: When password entered is not valid, in the log you might see the exception com.ibm.websphere.wim.exception.PasswordCheckFailedException: CWWIM4512E The password match failed. Make sure the password you are entering is right. Check if the Caps lock key is on. For reason 3: If configured with LDAP, then do the ldapsearch on that user. If the user cannot be found with ldapsearch, troubleshoot the problem from the LDAP perspective. For all other reasons of failure: Check the SystemOut.log or SystemErr.log. If they contain entries indicating a time-stamped FFDC log entry was generated, also review that FFDC log entry (there may be more than one). Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJPAK0010I

Login successful.

Explanation

The user has successfully logged in to the portal.

User response

No action is required.

EJPAK0050E

Portlet login is disabled. Please use the login screen to log in.

Explanation

Portlet login must be enabled in order to use the login portlet. Portlet login is enabled via the AuthenticationPortletService configuration. Please see the Information Center for more details.

User response

Please use the login screen to log in.

EJPAK0051W

Password is invalid. Please try again.

Explanation

The password entered is invalid.

User response

You must enter a valid password in order to log in to the portal.

EJPAK0052W

User session has timed out.

Explanation

The user session has been terminated because it was idle for too long. The user idle timeout can be adjusted in the Application Server configuration settings.

User response

The user must log in again to continue using the portal.

EJPAK0053W

System login exception.

Explanation

The user cannot login.

User response

Correction of the condition is required.

EJPAK0054W

User ID is invalid. Please try again.

Explanation

The user ID entered is invalid.

User response

You must enter a valid user ID in order to log in to the portal.

EJPAK0055W

Authentication failed.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAK0056W

Authentication exception caught.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAK0057W

Login exception caught.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAK0058E

The AuthenticationPortletService is unavailable.

Explanation

The JNDI lookup for the AuthenticationPortletService failed.

User response

Please ensure that that AuthenticationPortletService is registered, JNDI is enabled, and the service is AuthenticationPortletService is configured properly.

EJPAL: com.ibm.wps.portlets.manageprincipals.resources.ManagePrincipalsMessages

EJPAL0100I

User created successfully!

Explanation

The user has been successfully created.

User response

No action is required.

EJPAL0101I

User edited successfully!

Explanation

The user has been successfully edited.

User response

No action is required.

EJPAL0110I

User group created successfully!

Explanation

The user group has been successfully created.

User response

No action is required.

EJPAL0111I

User group edited successfully!

Explanation

The user group has been successfully edited.

User response

No action is required.

EJPAL0120I

User or user group deleted successfully!

Explanation

The user or user group has been successfully deleted.

User response

No action is required.

EJPAL0130I

User or user group has been successfully removed from the selected groups.

Explanation

The user or user group has been successfully removed from the selected groups.

User response

No action is required.

EJPAL0140I

User or user group has been successfully added to the selected group.

Explanation

The user or user group has been successfully added to the selected groups.

User response

No action is required.

EJPAL0150I

User or user group role has been duplicated successfully.

Explanation

The user or user group role has been successfully duplicated.

User response

No action is required.

EJPAL0160I

User or user group membership has been duplicated successfully.

Explanation

The user or user group membership has been successfully duplicated.

User response

No action is required.

EJPAL1000W

Sorry, no user was found!

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAL1010W

Sorry, no user or user group was found!

Explanation

This error message indicates that no user groups were found during the search. Possible reasons of failure are: Reason 1. There are no groups/users in the system matching the search criteria. Reason 2. If configured with LDAP, the group/user doesn't exist in LDAP. Reason 3. If you get this message while looking for membership of a group/user, then the group/user doesn't belong to any group. Reason 4. Clicked to open a group (which is empty) to show the members of that group. Other possible reasons of failure are: 1. Using dynamic group, and attributes are not set right. 2. Search filter value is not valid. 3. LDAP configuration settings are not right.

User response

Try one or more of the following actions. For reason 1: Enter a valid search value. To search for all groups, select All Available, and then search. To search all users, select proper Search by option, and the wildcard (*) in the search field. You can use a partial name with the wildcard (*) to search on all possible results matching the partial name. For reason 2: If configured with LDAP, then do the ldapsearch on that group/user. If it cannot be found with ldapsearch, troubleshoot the problem from the LDAP perspective. For reason 3: Add the user/group you are working on to another group. Then when you click on the membership button, it will list the group that you added to. Membership shows the group which includes the group/user you are working with. For reason 4: Add a group or user to the group you are working on so that the group won't be empty anymore. Then if you open the group to view members it should list the added group/user. For all other reasons of failure:Check the SystemOut.log or SystemErr.log. If they contain entries indicating a timestamped FFDC log entry was generated, also review that FFDC log entry (there may be more than one). Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.

EJPAL1020W

Sorry, no user group was found!

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAL2010W

Current user does not have permission to create a new user!

Explanation

The user does not have the necessary role to create a new user.

User response

Add the user to the necessary role.

EJPAL2020W

Current user does not have permission to create a new user group!

Explanation

The user does not have the necessary role to create a new user group.

User response

Add the user to the necessary role.

EJPAL2030W

Current user does not have permission to edit this user or user group!

Explanation

The user does not have the necessary role to edit this user or user group.

User response

Add the user to the necessary role.

EJPAL2040W

Current user does not have permission to delete selected user or user group!

Explanation

The user does not have the necessary role to delete this user or user group.

User response

Add the user to the necessary role.

EJPAL2050W

Some principals have been deleted successfully. You did not have permission to delete some selected principals.

Explanation

The user does not have the necessary role to delete some principals.

User response

Add the user to the necessary role.

EJPAL2060W

Some principals have been added to the group successfully. You did not have permission to add some selected principals.

Explanation

The user does not have the necessary role to add some principals to the group.

User response

Add the user to the necessary role.

EJPAL2070W

Some principals have been deleted from the group successfully. You did not have permission to delete some selected principals.

Explanation

The user does not have the necessary role to delete some principals from the group.

User response

Add the user to the necessary role.

EJPAL2080W

Current user does not have permission to view user or group membership!

Explanation

The user does not have the necessary role to view user or group membership.

User response

Add the user to the necessary role.

EJPAL2090W

Current user does not have permission to duplicate roles!

Explanation

The user does not have the necessary role to duplicate roles.

User response

Add the user to the necessary role.

EJPAL2100W

Current user does not have permission to duplicate group assignments!

Explanation

The user does not have the necessary role to duplicate group assignments.

User response

Add the user to the necessary role.

EJPAL3000E

Failed to delete user or user group!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAL3010E

Users cannot delete themselves!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAL3020E

This user group already exists!

Explanation

The user group already exists in the system.

User response

Give a different user group name.

EJPAL3024E

Failed to create the user group!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAL3025E

Failed to edit the user group!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAL3028E

Failed to create the user!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAL3029E

Failed to edit the user!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAL3030E

Failed to add users or user groups!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAL3032E

No users or user groups are selected to add!

Explanation

No users or user groups are selected to add.

User response

Select at least one user or user group before click OK.

EJPAL3035E

Parent group does not exist!

Explanation

Parent group might be deleted by another administrator while you are updating this group.

User response

Select a different group.

EJPAL3040E

Failed to remove users or user groups!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAL3050E

Failed to remove user or user group from all selected groups!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAL3060E

Field {0} needs a positive integer. Failed to save data.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAL3070E

Field {0} needs a positive integer. Failed to save data.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAL3080E

Failed to duplicate roles for the user or user group!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAL3090E

Failed to duplicate membership for the user or user group!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAL4000E

Too many matches found. Please refine your search criteria.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAL4010E

Membership successfully removed from some groups. You are not authorized to change the membership for the following groups: {0}

Explanation

The user does not have the necessary role to change membership for some groups.

User response

Add the user to the necessary role.

EJPAL4020E

The user group does not exist.

Explanation

The user group might be deleted by other Administrators.

User response

Select another user group.

EJPAM: com.ibm.wps.portlets.managewebservices.resources.ManagewebservicesMessages

EJPAM1010I

No Producers are found using this search pattern. Specify another search pattern.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAM1020W

Failed to retrieve Producer user attribute set.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM1030E

Failed to retrieve Producer information.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM1040E

Failed to create a Producer {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM1041I

The Producer creation process was cancelled.

Explanation

This is an information message that provides feedback on a Cancel operation.

User response

No action is required.

EJPAM1050E

Failed to modify the Producer {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM1051E

Fail to retrieve the Producer information.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM1060W

Fill out Title field before continuing.

Explanation

Title field must not be null.

User response

Fill out Title field.

EJPAM1070W

Fill out URL to WSDL service definitions field before continuing.

Explanation

URL to WSDL service definitions field must not be null.

User response

Fill out URL to WSDL service definitions field.

EJPAM1080I

Created the Producer successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAM1082I

Producer wsdl file processed successfully.

Explanation

This is an information message that provides feedback on the state of the Producer creation sequence.

User response

No action is required.

EJPAM1090I

Modified the Producer successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAM1091W

Unknown struts error was encountered.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM1092W

Class {0} received unknown action "{1}".

Explanation

This is a internal error message. An abnormal condition has been detected. The portal system will attempt to handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM1100E

Failed to get titles and descriptions for this Producer.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM1101E

Failed to save language-specific titles and descriptions for this Producer.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM1102E

Failed to edit language-specific titles and descriptions for this language.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM1103I

Language-specific titles and descriptions for Producer {0} have been set successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAM1104I

Language-specific title and description for language {0} have been set successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAM1105E

Failed to update title and description.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM1106I

Language-specific title and description for language {0} have been deleted successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAM1107E

Failed to delete language-specific titles and descriptions for language {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM1300E

Failed to save the security settings in the new producer. See the details for more information.

Explanation

An update failed. See the details for more information.

User response

This is likely an internal error, contace the portal administrator if the detailed message does not show a user error.

EJPAM1400E

There is no URL specified for the HTTP transport.

Explanation

The URL must be entered for the selected transport.

User response

Enter a URL for the transport, or select a different transport.

EJPAM1401E

There is no URL specified for the HTTPS transport.

Explanation

The URL must be entered for the selected transport.

User response

Enter a URL for the transport, or select a different transport.

EJPAM1402E

Dynamic transport requires both HTTP and HTTPS URLs.

Explanation

Dynamic transport requires both HTTP and HTTPS URLs.

User response

Enter a URL for both transports, or select a different transport.

EJPAM2000E

Validation error - the registration handle length must be between 1 and 255 bytes.

Explanation

This is a validation error.

User response

Correct the handle to meet the validation requirements.

EJPAM2100E

Failed to initiate bean for Registration Properties.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM2101E

Failed to create new registration property.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM2102E

Failed to delete the registration property with parameter name {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM2103E

Failed to save the registration properties.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM2104W

Provided parameter is blank.

Explanation

The Provided parameter name must not be null.

User response

Fill out the Provided parameter name field.

EJPAM2105W

Provided value is blank.

Explanation

The Provided value must not be null.

User response

Fill out the Provided value field.

EJPAM2106I

Successfully created the parameter/value pair {0}/{1} as a registration property.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAM2107I

Successfully deleted registration property with parameter name {0}.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAM2108E

Cannot load the original registration properties.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM2109W

Provided parameter already exists.

Explanation

The same Provided parameter name already exists for the producer.

User response

Specify a new Provided parameter name.

EJPAM2110I

Successfully updated registration property {0}. Previous value: {1}.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAM2120E

The registration operation failed.

Explanation

The registration operation failed.

User response

See the detailed error information for the cause.

EJPAM2140E

Failed to load the information on required registration information.

Explanation

This is an error message. The details will include the specific error.

User response

Correct the root cause of the error, and retry the operation.

EJPAM3101E

Failed to delete Producer {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM3102E

Failed to list the Web services associated with Producer {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM3103I

There are no web services associated with Producer {0}.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAM3104I

Successfully deleted Producer {0}.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAM4100E

Failed to initiate bean for Registration Properties.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM4101E

Failed to save the selected wsrp producer.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM4102W

Please select one wsrp producer from the list.

Explanation

User must select one wsrp producer from the list.

User response

Select one wsrp producer from the list.

EJPAM4103E

Cannot load the wsrp producer from Service Registry and Repository.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

This is an internal error, please contact portal administrator.

EJPAM9550E

A positive integer is required for field {0}. Saving of configuration data failed.

Explanation

A positive integer is required for the field.

User response

Please input a positive integer.

EJPAM9560E

A positive integer is required for field {0}. Saving of edited data failed.

Explanation

A positive integer is required for the field.

User response

Please input a positive integer.

EJPAN: com.ibm.wps.portlets.markup.resources.MarkupManagerMessages

EJPAN0001E

No markups defined.

Explanation

Markups must be defined in order to display a list.

User response

Create markups.

EJPAN0002E

The markup name must not consist of spaces only.

Explanation

A name consisting of spaces only is not a valid markup name.

User response

Enter more than spaces for the markup name.

EJPAN0003E

The maximum character set length is 64 characters.

Explanation

No more than 64 characters can be entered.

User response

Shorten the value entered to be no more than 64 characters.

EJPAN0004I

The markup {0} has been created successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAN0005I

The markup {0} has been deleted successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAN0006I

The markup {0} has been modified.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAN0007I

The markup {0} has been set active.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAN0008I

The markup {0} has been set inactive.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAN0009W

No markup has been selected.

Explanation

A markup must be selected before this action can be done.

User response

Select a markup and then continue.

EJPAN0010E

The selected markup does not exist.

Explanation

The selected markup does not exist. Another user may have already deleted this markup.

User response

Log off and back on to generate a new markup list.

EJPAN0011E

An application error occurred. View the log for details.

Explanation

This is a general exception. View the log for details on exactly what occurred.

User response

View the log for more information and/or contact your system administrator.

EJPAN0012E

The markup list could not be retrieved.

Explanation

A markup list could not currently be retrieved.

User response

Log off and back on. If the problem still exists, contact your system administrator.

EJPAN0013E

The markup with the ID {0} could not be found.

Explanation

The selected markup can not be found. It may have been deleted by another user.

User response

Log off and back on. If the problem is not corrected, contact your system administrator.

EJPAN0014E

The markup activation state could not be changed.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAN0015E

The markup could not be created.

Explanation

A markup can not currently be created.

User response

Log off and back on. If the problem is not fixed, contact your system administrator.

EJPAN0016E

The markup could not be found.

Explanation

This markup may have been deleted by another user.

User response

Log off and back on to generate a new listing. If the problem is not fixed, contact your system administrator.

EJPAN0017E

Argument "{0}" cannot be null.

Explanation

This argument must contain a value.

User response

Enter a value for this argument.

EJPAN0018E

The markup language settings could not be set.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Log off and back on. If the problem is not corrected, contact your system administrator.

EJPAN0019E

The markup could not be deleted.

Explanation

The markup selected can not be deleted. Another user may have already deleted this markup.

User response

Log off and back on. If the problem is not corrected, contact your system administrator.

EJPAN0020E

An exception occurred.

Explanation

This is a general error message. The log will contain more information.

User response

View the log for more details.

EJPAN0021W

You must enter a MIME type for the markup or cancel this action.

Explanation

A MIME type must be entered.

User response

Enter a MIME type for this markup.

EJPAN0022W

You must enter a default character set for the markup or cancel this action.

Explanation

A default character set must be entered for this markup.

User response

Enter a default character set.

EJPAN0023W

You are about to delete or deactivate a markup that is used by this administration program. If you continue, you will be no longer able to administer the portal using this administration program. Are you sure that you want to continue?

Explanation

Deleting of deactivating this markup will affect this administration program.

User response

Make sure this is the right markup to delete or deactivate.

EJPAN0024W

Are you sure you want to delete the selected markup?

Explanation

Verification that this is the correct markup to delete.

User response

Verify that this is the markup you want to delete.

EJPAO: com.ibm.wps.portlets.resourceview.resources.ResourceViewMessages

EJPAO1000W

You are not authorized to grant access to any resources!

Explanation

The user does not have the necessary role to grant access on resources.

User response

Add user to the necessary roles on the resources.

EJPAO1001W

You are not authorized to delegate access to any members!

Explanation

The user does not have the necessary role to delegate access to other users.

User response

Add user to the necessary roles.

EJPAO2001E

Cannot add Users to the role!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAO2002E

Cannot add User groups to the role!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAO2003E

Cannot add members to the role!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAO2004E

Cannot remove User from the role!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAO2005E

Cannot remove User Group from the role!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAO2006E

Cannot remove member from the role!

Explanation

The member cannot be removed from the selected role.

User response

Correction of the condition is required.

EJPAO2007E

Cannot assign role!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAO2008E

Cannot remove role!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAO2009E

Cannot move resource to Portal Access Control!

Explanation

The resource could not be brought under the Portal Access Control. Internalization failed.

User response

Correction of the condition is required.

EJPAO2010E

Cannot externalize resource!

Explanation

The resource could not be moved to the External Access Control. Externalization failed.

User response

Correction of the condition is required.

EJPAO2011E

Cannot allow propagation!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAO2012E

Cannot block propagation!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAO2013E

Cannot allow inheritance!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAO2014E

Cannot block inheritance!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAO2015E

Cannot create role!

Explanation

The selected role could not be created in the External Access Control.

User response

Correction of the condition is required.

EJPAO2016E

Cannot delete role!

Explanation

The selected role could not be deleted in the External Access Control.

User response

Correction of the condition is required.

EJPAO2017E

Cannot change Search Configuration!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAO2018E

Cannot change owner!

Explanation

The ownership of the selected resource could not be changed.

User response

Correction of the condition is required.

EJPAO2019E

Search criteria cannot be empty!

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAO2020E

Cannot modify Propagation/Inheritance!

Explanation

Cannot modify Propagation/Inheritance on the selected resource.

User response

Correction of the condition is required.

EJPAO2021E

Cannot modify Member's roles!

Explanation

Cannot modify the member's role(s) on the selected resource.

User response

Correction of the condition is required.

EJPAO2022E

A positive integer is needed for field {0}. Saving of configuration data failed.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAO2023E

A positive integer is needed for field {0}. Saving of edited data failed.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAO3000W

No user found!

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAO3001W

No user group found!

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAO3002W

No member found!

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAO3003W

No resource found!

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAO3004W

You must specify a member!

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAO3005W

You must specify a resource!

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAO3006W

Too many matches found. Please refine your search criteria.

Explanation

This is an warning message. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAO4001I

Users added successfully to the role.

Explanation

The selected users have been successfully added to the role.

User response

No action is required.

EJPAO4002I

Usergroups added successfully to the role.

Explanation

The selected user groups have been successfully added to the role.

User response

No action is required.

EJPAO4003I

Members successfully added to the role.

Explanation

The selected members have been successfully added to the role.

User response

No action is required.

EJPAO4004I

User removed from the role.

Explanation

The selected user has been successfully removed from the role.

User response

No action is required.

EJPAO4005I

Usergroup removed from the role.

Explanation

The selected user group has been successfully removed from the role.

User response

No action is required.

EJPAO4006I

Member has been removed from the role.

Explanation

The selected member has been successfully removed from the role.

User response

No action is required.

EJPAO4007W

No members added to the role.

Explanation

There were no members added to the selected role.

User response

Correction of the condition is recommended.

EJPAO4008W

No members found in the role.

Explanation

There were no members found in the selected role.

User response

Correction of the condition is recommended.

EJPAO4009I

Member successfully assigned to the role.

Explanation

The selected member has been successfully assigned to the role.

User response

No action is required.

EJPAO4010I

Member removed from the role.

Explanation

The selected member has been successfully removed from the role.

User response

No action is required.

EJPAO4011I

Resource is now under Portal Access Control.

Explanation

The selected resource has been successfully moved to the Portal Access Control.

User response

No action is required.

EJPAO4012I

Resource successfully externalized.

Explanation

The selected resource has been successfully moved to the External Access Control.

User response

No action is required.

EJPAO4013I

Propagation allowed.

Explanation

Propagation of the role has been successfully allowed on the selected resource.

User response

No action is required.

EJPAO4014I

Inheritance allowed.

Explanation

Inheritance of the role has been successfully allowed on the selected resource.

User response

No action is required.

EJPAO4015I

Propagation blocked successfully.

Explanation

Propagation of the role has been successfully blocked on the selected resource.

User response

No action is required.

EJPAO4016I

Inheritance blocked successfully.

Explanation

Inheritance of the role has been successfully blocked on the selected resource.

User response

No action is required.

EJPAO4017I

Inheritance modified successfully.

Explanation

Inheritance of the role has been successfully modified on the selected resource.

User response

No action is required.

EJPAO4018I

Propagation modified successfully.

Explanation

Propagation of the role has been successfully modified on the selected resource.

User response

No action is required.

EJPAO4019I

Role created successfully in external access control.

Explanation

The selected role has been successfully created in the External Access Control.

User response

No action is required.

EJPAO4020I

Role deleted successfully in external access control.

Explanation

The selected role has been successfully deleted in the External Access Control.

User response

No action is required.

EJPAO4021I

Search Configuration changed successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAO4022I

Owner successfully changed.

Explanation

The selected member has been successfully made the new owner of the resource.

User response

No action is required.

EJPAO4023I

Propagation/Inheritance modified successfully.

Explanation

Propagation/Inheritance of the role has been successfully modified on the selected resource.

User response

No action is required.

EJPAO4024I

Member's roles modified successfully.

Explanation

The member's role(s) have been successfully modified on the selected resource.

User response

No action is required.

EJPAP: com.ibm.wps.portlets.portalsettings.resources.PortalSettingsMessages

EJPAP0001E

Unable to retrieve portal global settings. Please see log for details.

Explanation

The Global Settings portlet was unable to load the settings for the portal server.

User response

Please see log and message details for more information about the error.

EJPAP0002E

Unable to save portal global settings. Please see log for details.

Explanation

The Global Settings portlet was unable to save the updated system settings.

User response

Please ensure that the current user has access rights to update the portal settings, and see the log and message details for more information about the error.

EJPAP0003E

The current default language is not supported by the portal. Please select a new default language from the list.

Explanation

The Global Settings portlet was unable to determine the default language for the portal server. This is an unexpected condition that should be corrected.

User response

Please use the Global Settings portlet to set a default language for the server.

EJPAP0004E

Your browser's locale setting is not supported by this portlet. Please see log for details.

Explanation

Your browser specified a language that is not supported by the portal server.

User response

Please select a language that is supported by the portal server to be the new default language.

EJPAP0005E

An unknown error occurred. Please see log for details.

Explanation

An unknown error occurred while trying to save the new portal settings values.

User response

Please ensure that your inputs are valid, and see the log and message details for more information about the error.

EJPAP0006E

An exception occurred.

Explanation

An unknown exception occurred while either retrieving or saving the default languages set for the portal.

User response

Please check that a valid language is selected.

EJPAP0007E

Error occurred in URL constructor. Continuing with find URL = {0}

Explanation

The format of the specified search URL is invalid. The system will attempt to add a protocol header and save your input.

User response

Please ensure that your input can be parsed by the Java URL class.

EJPAP0008E

Unsuccessful execution of UpdatePortalSettingsCommand.

Explanation

An unknown error occurred while trying to update the portal settings.

User response

Please check that your inputs are valid, and see the log and message details for more information about the error.

EJPAP0009E

No match found for selected language = {0}

Explanation

Your browser specified a language that is not supported by the portal server.

User response

Please select a language that is supported by the portal server to be the new default language.

EJPAP0010E

List returned by command was null.

Explanation

The portlet was unable to retrieve a list of the languages supported by your portal server.

User response

Please ensure that your portal supports at least one language.

EJPAP0011E

Unsuccessful execution of QueryLanguageDescriptorCommand.

Explanation

The system was unable to parse the list of languages supported by the portal server.

User response

Please ensure that your portal supports at least one language.

EJPAP0012E

Unsuccessful execution of GetPortalSettingsCommand.

Explanation

The Global Settings portlet was unable to retrieve the current portal settings.

User response

Please ensure that the current user has access to view the portal settings.

EJPAP0013E

Unable to define language list.

Explanation

There are no languages supported by your portal.

User response

Please ensure that your portal supports at least one language.

EJPAP0014I

Please remember to restart the application server to have your changes take effect.

Explanation

Your settings changes have been saved. You must restart the server in order for them to take effect.

User response

No action is required.

EJPAP0015I

You do not have appropriate access rights. Please contact your administrator.

Explanation

The user does not have appropriate access rights. Please contact your administrator.

User response

Please ensure the current user has access to administer the portlet.

EJPAQ: com.ibm.wps.portlets.portletmanager.resources.PortletManagerMessages

EJPAQ1101E

Failed to delete Web module {0}.

Explanation

An attempt was made to delete the named web module, but Portal was unable to complete the process. Prior error messages should indicate the root cause of the failure.

User response

Look in the Portal SystemOut.log and SystemErr.log files, especially for messages immediately preceding this one that may give more details about the root cause of the failure. If there are any entries indicating the creation of FFDC log instances, also check those FFDC log instances for additional details about the root cause. If possible, correct the problem and retry the operation.

EJPAQ1102I

Successfully deleted Web module {0}.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ1201I

Web module {0} has been already started.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ1202I

Web module {0} has been started successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ1203E

Selected web module was not found.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ1204W

Unable to start Web module {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ1205E

Unable to stop Web module {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ1206I

Web module {0} has already been stopped.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ1207I

Web module {0} has been stopped successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ1310E

Lost track trying to update the selected Web module from the table. The Web module may have been deleted or access may have changed. Try again.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ1311E

Lost track of the selected WAR file from the Browse button. Make sure it is on the disk and try again.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ1312E

Internal error in portlet. Could not find the form data. Contact your administrator.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ1313E

Could not find the selected file, or lost track of the selected file from the browse button. Try again.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Re-select a war file.

EJPAQ1314E

Internal error in portlet. Could not find the form data. Contact your administrator.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ1315E

Could not store the selected file from the browse button into the Dynacache. Try again or check cache settings.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Re-select a war file and check your cache settings.

EJPAQ1316E

Could not process the selected file from the browse button as a WAR file. Make sure it is a WAR file and try again.

Explanation

This error message indicates there was a problem processing the selected file. Possible reasons for the error may include (but are not limited to):<ol> <li>The selected file is not a valid web archive (WAR) file. The portlet.xml or web.xml files contained in the WAR may be invalid. The WAR file may be corrupted.<li>If the WAR file is an update of an existing portlet, verify that the update is compatible.<li>The WAR file may have been compiled using a Java Development Kit (JDK) that is not compatible with the version of Java installed with WebSphere Portal Server.<li>A shared library needed to successfully run the portlet is not installed.</ol>

User response

Click on View Details for more information on the series of events that led to this failure. <ul> <li>For reason 1: Verify that the selected WAR file is not corrupt and the contents can be successfully viewed. Import the WAR file into a development tool such as IBM Rational Application Developer to verify that all components are complete and correct.<li>For reason 2: Check the requirements of the updated WAR file and verify that it is compatible with the version of WebSphere Portal Server that you are using. If the WAR has specific instructions for performing the update, make sure that all steps are correctly followed.<li>For reason 3: Compare the versions of Java used to build the WAR with the Java version in use with WebSphere Portal Server. Recompile the WAR file if needed.<li>For reason 4: If the WAR file requires any shared libraries to be installed before deploying the portlet, follow any instructions that may have come with the portlet and verify that the shared library or jar files are correctly installed.<li>For all other reasons of failure: Check the SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating a timestamped FFDC log entry was generated, also review that FFDC log entry (there may be more than one). Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem.</ul> If the problem still persists, check the technical information databases at http://www-01.ibm.com/software/genservers/portal/support/. If you cannot find the information that you need to solve the problem, contact your technical support provider or refer to the guidance in "Exchanging information with IBM Technical Support for problem determination" at http://www-01.ibm.com/support/docview.wss?uid=swg21201571

EJPAQ1317E

There was an exception when trying to retrieve the selected file from the Browse button. Try again.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Re-select a war file. Make sure the file you select is a correct war file.

EJPAQ1318E

There was an exception when trying to install the Web module.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Look at the exception that was generated.

EJPAQ1319E

Cannot install the selected WAR file.

Explanation

This error message indicates that there was an error while attempting to install the WAR file. Possible reasons for failure are:<ol><li>A Portlet with same name already exists.<li>The WAR file itself is defective in some way.<li>Insufficient permission to perform the installation.<li>Problem not specific to the particular portlet.<li>SOAP connector problems.</ol>Other possible reasons of failure (less likely, but have been encountered in the past) are:<ul><li>Problems related to certificate when using SSL (Secure Sockets Layer)<li>Error in credential vault slot configuration.<li>Error in enabling security.<li>System is low on disk space.</ul>

User response

Click on View Details for more information on the series of events that led to this failure.For reason 1: Make sure you are not trying to install a portlet which is a duplicate of an existing portlet. In that case, then you would see an exception com.ibm.wps.pe.mgr.exceptions.DuplicateAppException: EJPPF0170E in the log. Uninstall the portlet, restart server and re-deploy the portlet. You can use xmlaccess to install and uninstall portlets.For reason 2: Make sure the portlet war contains valid files, for example portlet.xml, web.xml.For reason 3: Make sure the user doing the installation has the necessary permission to install a portlet. Necessary permission to do Portal operations are documented in the Access rights section in Portal Infocenter.For reason 4: If the install fails for any web module that is attempted, then the problem is not with any specific war, rather with the system in general. Check the SystemOut and SystemErr logs, and FFDC logs if indicated, for more information about any underlying errors that are occurring, to take appropriate action.For Reason 5: If you are seeing the exception com.ibm.websphere.management exception. Connector Exception: ADMC0053E: The system cannot create a SOAP connection connect to host..., then modify the &lt;was_profiles_dir&gt;/properties/soap.client.props, and change the com.ibm.SOAP.requestTimeout value from the default of 180 to 6000. If you are seeing the exception com.ibm.websphere.management.exception.ConnectorException: ADMC0053E: Could not create SOAP Connector to connect to host localhost at port &lt;port&gt; with SOAP Connector security enabled, then edit this DeploymentService.properties file and change the value of property was.admin.host from localhost to the actual_machine_hostname. Re-start the portal server.For all other reasons of failure: Check the SystemOut.log or SystemErr.log for additional error messages which may supply more detail about the failure. If they contain entries indicating a timestamped FFDC log entry was generated, also review that FFDC log entry (there may be more than one).

EJPAQ1320E

Cannot replace {0} with {1}. The WAR filenames must match.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Re-select a war file. Make sure the file you select is a correct war file.

EJPAQ1330W

Web module {0} was successfully installed, but could not be started at this time. Manually start the portlet application in the Manage Web Modules portlet.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAQ1331W

Web module {0} was successfully updated, but could not be started at this time. Manually start the portlet application in the Manage Web Modules portlet.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAQ1332I

Web module {0} was successfully installed.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ1333I

Web module {0} was successfully updated.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ1401I

The web module {0} does not contain any portlet applications.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

Re-select a war file. Make sure the file you select is a correct war file.

EJPAQ1402E

Error finding the properties of web module {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ1801I

Web module(s) have been consumed.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ1802E

One or more Web modules were not consumed. Review results and try again.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ1803I

No Producers were found using this search pattern. Specify another search pattern.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ1804I

No Producers were found.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ1805I

No Web services were found using this search pattern. Specify another search pattern.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ1806I

No Web services were found.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ2002I

No portlet applications were found. You may not be authorized to view them.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

If portlet applications exist, edit your user permissions in order to view the portlet applications.

EJPAQ2101E

Failed to create portlet application {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ2102I

Successfully created portlet application {0}.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ2201E

Unable to edit portlet application {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ2202E

New parameter field cannot be empty.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ2203E

Parameter already exists.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ2206W

Portlet application title provided is blank. Supply a new portlet application title.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAQ2207W

Portlet application title provided is too long. Supply a new portlet application title.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAQ2301E

Failed to delete portlet application {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ2302I

Successfully deleted portlet application {0}.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ2501E

Unable to get locale-specific titles and descriptions for this portlet application.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ2502E

Failed to save locale-specific titles and descriptions for this portlet application.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ2503E

Failed to edit locale-specific titles and descriptions for this locale.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ2504I

Locale-specific titles and descriptions for portlet application {0} have been set successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ2505I

Locale-specific title and description for locale {0} have been set successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ2506E

Failed to update title and description.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ2507I

Locale-specific title and description for locale {0} have been deleted successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ2508E

Failed to delete locale-specific titles and descriptions for this locale {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ3001W

No portlets were found. You may not be authorized to view any portlets.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

If portlets exist, edit your user permissions in order to view the portlets.

EJPAQ3002W

You are not authorized to view any portlets. Contact your administrator.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

If portlets exist, edit your user permissions in order to view the portlets.

EJPAQ3003E

Unable to retrieve any portlets.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ3004I

No portlets were found using this search pattern. Specify another search pattern.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ3101E

Failed to provide portlet {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ3102I

Successfully provided portlet {0} as a Web service.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ3103E

Failed to withdraw portlet {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ3104I

Successfully withdrew portlet {0} as a Web service.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ3201E

Failed to create portlet {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ3202I

Successfully created portlet application {0} and portlet {1}.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ3203W

Failed to get local settings.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAQ3204W

Cannot set the title.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAQ3205E

Failed to initiate bean for copy.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ3206W

Portlet title provided is blank. Supply a new portlet title.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAQ3207W

Portlet title provided is too long. Supply a new portlet title.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAQ3301E

Use check box to set settings for parallel rendering.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ3302E

Unable to edit portlet {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ3303E

New parameter field cannot be empty.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ3304E

Parameter already exists.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ3305E

Enter a positive integer for cache time settings.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ3306I

The remote portlet {0} is available. The update to the remote portlet settings was successful and will only effect the proxy portlet.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ3307I

The remote portlet {0} is not known by the Producer. The update to the remote portlet settings was successful and will only effect the proxy portlet.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ3308I

The remote portlet {0} status check failed. The update to the remote portlet settings was successful and will only effect the proxy portlet.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ3309I

Successfully saved changes to portlet {0}.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ3310E

New preference field cannot be empty.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ3312E

Preference already exists.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ3401E

Unable to get locale-specific titles and descriptions for this portlet.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ3402E

Failed to save locale-specific titles and descriptions for this portlet.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ3403E

Failed to edit locale-specific titles and descriptions for this locale.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ3404I

Locale-specific titles and descriptions for portlet {0} have been set successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ3405I

Locale-specific title and description for locale {0} have been set successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ3406E

Failed to update title and description.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ3407I

Locale-specific title and description for locale {0} have been deleted successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ3408E

Failed to delete locale-specific titles and descriptions for this locale {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ3501E

Failed to delete portlet {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ3502I

Successfully deleted portlet {0}.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ3701I

The portlet {0} is available.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ3702I

The portlet {0} is not known by the Producer.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ3705E

Failed to test portlet {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ3801E

Failed to block requests to portlet {0}.

Explanation

Portlet Load Monitor function attempted to block requests to the indicated portlet, based on an explicit administrator request via the Portlet Manager admin portlet. However, this attempt to block requests to this portlet was not successful. This means that requests may continue to be routed to this portlet.

User response

Check the SystemOut.log and SystemErr.log for the Portal server. Error messages prior to this one may have been logged that might indicate more details about the state of the system and the actual underlying cause of the failure to take the portlet off-line. If there are any indications that FFDC log entries were created, also examine those FFDC log entries for additional information that may be provided. It may be necessary to run the system with tracing active for <com.ibm.wps.command.plm.*=all:com.ibm.wps.pe.pc.waspc.plm.*=all> to catch problems with the Portlet Load Monitor administration function.

EJPAQ3802I

Successfully blocked requests to portlet {0}.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ3803E

Failed to unblock requests to portlet {0}.

Explanation

Portlet Load Monitor function attempted to unblock requests to the indicated portlet, as directed by an explicit administrator request via the Portlet Manager admin portlet. However, this attempt to unblock requests to the indicated portlet was not successful. This means that the indicated portlet remains blocked by Portlet Load Monitor. This error may be because the number of currently served requests still exceeds the defined maximum number of allowed requests for this portlet, or may be for some other reason.

User response

If the problem is due to the number of concurrent threads consumed by the portlet still being too high, you may increase maximum number of concurrent requests allowed for this portlet. However, please be aware that this may simply mask a problem that has not been addressed and may result in greater performance problems due to increased thread consumption by this portlet. If the problems is some other cause, please check the SystemOut.log and SystemErr.log for the Portal server. Error messages prior to this one may have been logged that might indicate more details about the state of the system and the actual underlying cause of the failure to place the indicated portlet back on-line. If there are any indications that FFDC log entries were created, also examine those FFDC log entries for additional information that may be provided. It may be necessary to run the system with tracing active for <com.ibm.wps.command.plm.*=all:com.ibm.wps.pe.pc.waspc.plm.*=all> to catch problems with the Portlet Load Monitor function.

EJPAQ3804I

Successfully unblocked requests to portlet {0}.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAQ9200W

Internal processing problem - check log for more information.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAQ9300E

Internal error - check log for more information.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ9400E

Internal exception in struts.

Explanation

This error message indicates that there was an internal error with the normal processing of this portlet. Possible reasons for the internal error may include (but are not limited to): 1) The File Descriptor Limit (ulimit) was not set in accordance with the installation instructions. This problem typically occurs on Linux systems. 2) The software and hardware requirements to successfully run WebSphere Portal Server have not been met. Please review the requirements for the specific operating system and version of portal that are being used. If you are running a 64-bit operating system, there may be some 32-bit libraries required to successfully run portal. 3) A timeout error occurred.

User response

Click on View Details for more information on the series of events that led to this failure. In addition, check the SystemOut.log, SystemErr.log, the FFDC logs and other equivalent logs for additional information on the failure, in particular for messages indicating the underlying root cause of the failure. For reason 1: Run the command ulimit -a to verify that the setting is 10240 or higher. If it is not, run the command ulimit -n 10240, verify it with ulimit -a, and then restart the server. For reason 2: Review the WebSphere Portal detailed system requirements online that are specific to the portal release and platform that you are using to ensure that all requirements are being met. For all other reasons of failure: Check the SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating a timestamped FFDC log entry was generated, also review that FFDC log entry (there may be more than one). Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem. If the problem still persists, check the technical information databases at http://www-01.ibm.com/software/genservers/portal/support/. If you cannot find the information that you need to solve the problem, contact your technical support provider or refer to the guidance in "Exchanging information with IBM Technical Support for problem determination" at http://www-01.ibm.com/support/docview.wss?uid=swg21201571

EJPAQ9401E

Internal error in struts.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ9550E

A positive integer is needed for field {0}. Saving of configuration data failed.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAQ9560E

A positive integer is needed for field {0}. Saving of edited data failed.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAR: com.ibm.wps.portlets.portletWiring.resources.portletWiringMessages

EJPAR0010E

Unable to retrieve wire information.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Click on View Details for more information on the series of events that led to this failure. Please check the SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating a timestamped FFDC log entry was generated, also review that FFDC log entry (there may be more than one). Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem. If the problem still persists, check the technical information databases at http://www-01.ibm.com/software/genservers/portal/support/. If you cannot find the information that you need to solve the problem, contact your technical support provider or refer to the guidance in "Exchanging information with IBM Technical Support for problem determination" at http://www-01.ibm.com/support/docview.wss?uid=swg21201571

EJPAR0011E

Failed to re-activate the page.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Click on View Details for more information on the series of events that led to this failure. Please check the SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating a timestamped FFDC log entry was generated, also review that FFDC log entry (there may be more than one). Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem. If the problem still persists, check the technical information databases at http://www-01.ibm.com/software/genservers/portal/support/. If you cannot find the information that you need to solve the problem, contact your technical support provider or refer to the guidance in "Exchanging information with IBM Technical Support for problem determination" at http://www-01.ibm.com/support/docview.wss?uid=swg21201571

EJPAR0012E

Unable to retrieve details for one or more portlets.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Confirm the parameters, properties, and actions for the portlet are defined correctly and that you have the correct user rights to the portlet.

EJPAR0013E

Unable to determine if the actions are global. The Manage Actions page may display incorrect data.

Explanation

This is an error message. The action will not be displayed correctly in the Manage Actions page.

User response

Please make sure the actions are defined correctly and then refresh the portlet.

EJPAR0014E

Unable to save the changes you made to the Manage Actions page.

Explanation

This is an error message. The action will not be displayed correctly in the Manage Actions page.

User response

Please make sure the actions are defined correctly and then refresh the portlet.

EJPAR0020E

Unable to create wire.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

The wire you are trying to create may already have been created by another user while you were trying to create it.

EJPAR0030E

Unable to delete wire.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

The wire you are trying to delete may already have been deleted while you were trying to delete it.

EJPAR0040E

Unable to commit your changes to the page.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Click on View Details for more information on the series of events that led to this failure. Please check the SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating a timestamped FFDC log entry was generated, also review that FFDC log entry (there may be more than one). Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem. If the problem still persists, check the technical information databases at http://www-01.ibm.com/software/genservers/portal/support/. If you cannot find the information that you need to solve the problem, contact your technical support provider or refer to the guidance in "Exchanging information with IBM Technical Support for problem determination" at http://www-01.ibm.com/support/docview.wss?uid=swg21201571

EJPAR0050E

Unable to retrieve the parameters for this portlet.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Confirm the parameters for the portlet are defined correctly.

EJPAR0060E

Unable to retrieve the properties for this portlet.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Confirm the properties for the portlet are defined correctly.

EJPAR0070E

Unable to retrieve the actions for this portlet.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Confirm the actions for the portlet are defined correctly.

EJPAR0080E

User does not have enough security access to perform this function.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Change permissions for your userid.

EJPAR0090E

A page must be selected.

Explanation

This error message indicates the user or group may not have right permission. Possible reasons for the error may include (but are not limited to): 1) The user or group may not have right permission. 2) The WMM group cache or user cache is enabled.

User response

Click on View Details for more information on the series of events that led to this failure. For reason 1: Verify the user or group has permission to access the Page and Portlet. For reason 2: Verify the WMM group cache and user cache are disabled. For all other reasons of failure: Check the SystemOut.log or SystemErr.log for additional information about the error. If the SystemOut.log or SystemErr.log contains entries indicating a timestamped FFDC log entry was generated, also review that FFDC log entry (there may be more than one). Please note that the filenames listed above for the log files are the defaults. Your deployment may have configured these to be different than the defaults, or to be in non-default folders in the filesystem. If the problem still persists, check the technical information databases at http://www-01.ibm.com/software/genservers/portal/support/. If you cannot find the information that you need to solve the problem, contact your technical support provider or refer to the guidance in "Exchanging information with IBM Technical Support for problem determination" at http://www-01.ibm.com/support/docview.wss?uid=swg21201571

EJPAR1010W

Uncommitted wire changes were discarded due to page change.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAR1011W

No output properties exist.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAR1012W

No input properties exist.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAR2010I

Successfully retrieved wire information.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAR2020I

Wire was successfully created.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAR2030I

Wire was successfully deleted.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAR2040I

Successfully committed changes to the page.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAR2050I

No wires have been created on the page.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAR2060I

The page you selected is transient and no wires can be created or deleted on this page.

Explanation

The transient page is created by using an existing static page as the template. Any wires on the template page are cloned and applied to the portlet instances on the transient page, but these currently cannot be deleted nor can new wires be added to the transient page.

User response

Edit the static page of this transient page.

EJPAR2070I

No wires can be created on this page.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

The page must contain portlets that can be wired.

EJPAS: com.ibm.wps.portlets.properties.resources.PropertiesMessages

EJPAS0001E

Please input a title before continuing.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAS0002E

Please select a derivation parent before continuing.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAS0003E

The selected derivation parent does not exist. Please reselect before continuing.

Explanation

The select derivation parent page has been deleted by another user.

User response

Select another page as derivation parent page.

EJPAS0004E

Please select a favorite page before continuing.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAS0005E

The selected page is deleted. Please select another page before continuing.

Explanation

The selected page has been deleted by another user.

User response

Select another page.

EJPAS0006E

Transaction has been rolled back.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAS0007E

Invalid context information.

Explanation

The context information passed by Theme is lost.

User response

User may need to logout and login again.

EJPAS0008E

Invalid input.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAS0009E

Parent page has been deleted.

Explanation

The parent page has been deleted by another user.

User response

Select another page as parent page.

EJPAS0010I

{0} has been created successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAS0011I

{0} has been edited successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAS0012E

The Properties page has been launched with no context information.

Explanation

The context information passed by Theme is lost.

User response

User may need to logout and login again.

EJPAS0013I

No portlets satisfy this search criterion. Please change before continuing.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAS0014E

Please enter a positive integer for field {0}. Edited data was not saved.

Explanation

The field only takes positive integer.

User response

Enter a positive integer.

EJPAS0015E

Please enter a positive integer for field {0}. Configured data was not saved.

Explanation

The field only takes positive integer.

User response

Enter a positive integer.

EJPAS0016E

Please select at least one markup before continuing.

Explanation

User must select at least one markup.

User response

Select markups.

EJPAS0017E

Unable to create {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAS0018E

Unable to edit {0}.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAS0019E

You are not authorized to perform this action. Please contact your administrator.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAS0020I

{0} has been created successfully. It will not be shown in an HTML browser because HTML is not a supported markup.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAS0021I

{0} has been edited successfully. It will not be shown in an HTML browser because HTML is not a supported markup.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAS0022W

{0} has been created successfully. It is not under Home, so it is not included in theme navigation. Please use UrlGenerationTag to create a link to it.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAS0023W

{0} has been edited successfully. It is not under Home, so it is not included in theme navigation. Please use UrlGenerationTag to create a link to it.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAS0024W

{0} has been created successfully. It will not be shown in an HTML browser because HTML is not a supported markup. It is not under Home, so it is not included in theme navigation. Please use UrlGenerationTag to create a link to it.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAS0025W

{0} has been created successfully. It will not be shown in an HTML browser because HTML is not a supported markup. It is not under Home, so it is not included in theme navigation. Please use UrlGenerationTag to create a link to it.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Correction of the condition is recommended.

EJPAS0026E

Invalid cache expiry seconds are entered. Valid numbers are positive integers up to 2147483647.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAS0027E

The page you are editing has been deleted.

Explanation

The page has been deleted by another user.

User response

Select another page.

EJPAS0028E

Please enter a value for a remote server url

Explanation

Server URL is a required field.

User response

Fill in "Server URL" field.

EJPAS0029E

Both New parameter and New value fields must have values. They can not be empty.

Explanation

Both New parameter and New value fields are required fields.

User response

Fill in "New parameter" and "New value" fields.

EJPAS0030E

A parameter with this name already exists.

Explanation

There cannot be duplicate parameter names. The new parameter name must be unique among the existing parameter names.

User response

Modify the new parameter name to a unique string.

EJPAS0031E

The New parameter name must not start with com.ibm.portal. Use com.ibm.portal.* for WebSphere Portal internal parameter names only.

Explanation

All user-defined parameter names must not start with com.ibm.portal. Parameter names beginning with com.ibm.portal are for WebSphere Portal internal use only.

User response

Modify the New parameter name to a different string which does not start with com.ibm.portal.

EJPAS0032E

An exception occurred while trying to retrieve the theme policies. The exception is {0}.

Explanation

Not able to retrieve the theme policies, using the OOB list.

User response

Verify that the policies definitions in the jcr are correct. If so, contact support.

EJPAS0033I

Unable to retrieve a live theme policy list, using out of box default list.

Explanation

Not able to retrieve the theme policies, using the OOB list.

User response

Verify that the policies definitions in the jcr are correct. If so, contact support.

EJPAS0034W

The page referenced by this url page is deleted, please select another page.

Explanation

The page referenced by this url page is deleted.

User response

Select another page.

EJPAS0035W

The referenced page can't be changed if the referenced page is not a bookmarkable page.

Explanation

The page referenced by this url page is not a bookmarkable page.

User response

Use xmlAccess to change referenced page if needed.

EJPAS0040I

No pages are found using this search pattern. Please specify another search pattern.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

Specify another search Pattern.

EJPAS0045E

Failed to retrieve pages.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAS0050E

The friendly URL name contains an invalid character. The name may only contain alphabetic or digital characters, or any of the characters between the double quotes in the following string: "-._~". Modify the name and try again.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAS0055E

The Static Page Layout File doesn't match with the zip or html file. Please modify the Static Page Layout File or the zip/html file and try again.

Explanation

This is an error message. The Static Page Layout File doesn't match with the zip or html file. The portal system cannot handle this condition without failing.

User response

Correction of the input is required.

EJPAS0060E

The Static Page Layout File does not match with the zip or {0} file. Please modify the Static Page Layout File or the zip or {1} file and try again.

Explanation

This is an error message. The Static Page Layout File doesn't match with the zip or html file. The portal system cannot handle this condition without failing.

User response

Correction of the input is required.

EJPAS0070E

Failed in loading Zip or {0} file, update Zip or {1} file field and try again.

Explanation

This is an error message. Bad Zip or html file

User response

Correction of the input is required.

EJPAS0075E

Failed in loading Zip or markup file, update Zip or markup file field and try again.

Explanation

This is an error message. Bad Zip or html file

User response

Correction of the input is required.

EJPAS0080E

Static Page Layout File and ZIP or markup File Location are required for all supported markups, please specify them and try again.

Explanation

This is an error message. Use Set page layout properties link to specify them

User response

Correction of the input is required.

EJPAS0085E

The selected template does not exist. Please reselect before continuing.

Explanation

The selected template page has been deleted by another user.

User response

Select another page as template page.

EJPAT: com.ibm.wps.portlets.selfcare.resources.SelfcareMessages

EJPAT0001E

This User ID already exists

Explanation

There is already a user registered with this user ID.

User response

The user must choose a unique user ID.

EJPAT0002E

Passwords do not match

Explanation

The user is prompted to enter their password twice. This condition occurs if the passwords in each field do not match.

User response

Please reenter your passwords.

EJPAT0003E

Password is too short

Explanation

The specified value is too short to be a valid password.

User response

Please choose a longer password.

EJPAT0004E

Current password is incorrect

Explanation

The specified value is not the correct password.

User response

Please enter the correct password.

EJPAT0005E

User creation failed

Explanation

The execution of the enroll user command failed.

User response

Please check that the user information entered is valid and that the specified user ID does not already exist in the system.

EJPAT0006E

User update failed

Explanation

The execution of the update user command failed.

User response

Please check that the user information entered is valid.

EJPAT0007E

Current password is not specified

Explanation

The current password is required for certain changes. Please specify a value for the password.

User response

Please enter the correct password.

EJPAT0010I

User created successfully

Explanation

A new user was enrolled successfully.

User response

No action is required.

EJPAT0011I

User updated successfully

Explanation

The user profile was updated successfully.

User response

No action is required.

EJPAT0012I

Selected user attributes successfully updated

Explanation

The portlet settings for which user attributes are displayed were updated successfully

User response

No action is required.

EJPAT0020E

Unsuccessful execution of QueryLanguageDescriptorCommand.

Explanation

The Edit My Profile portlet was unable to get a list of the languages that the portal supports.

User response

Please use the Global Settings portlet to ensure that at least one language is supported by the portal and that there is a default language selected.

EJPAT0021E

An exception occurred.

Explanation

An unexpected exception has occurred.

User response

Please restart your portal and try again.

EJPAT0022E

A command exception occurred.

Explanation

The execution of a command failed.

User response

Please ensure that the settings specified are valid and try again.

EJPAU: com.ibm.wps.portlets.setpermissions.resources.setpermissionsMessages

EJPAU0001E

Failed to delete page.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAU0002E

The Portlet Session is null.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAU0003E

There is no page selected.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

The page could be deleted.

EJPAU0004E

This is a private page. You cannot set locks on a private page.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

When a user has only user rights and creates a page, that page is considered a private page.

EJPAU0101I

Page successfully deleted.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAU1001W

You do not have the correct user permissions to view this page.

Explanation

This is a warning message. An abnormal condition has been detected. The portal system is able to handle this condition without failing.

User response

Please change your user permissions.

EJPAW: com.ibm.wps.portlets.themesAndSkinsManager.resources.ThemesAndSkinsManagerMessages

EJPAW0001W

Please select a theme before performing this action.

Explanation

A theme must be selected before this action can be done.

User response

Select a theme and then continue.

EJPAW0002W

Please select a skin before performing this action.

Explanation

A skin must be selected before this action can be done.

User response

Select a skin and then continue.

EJPAW0003W

You must enter a name for the theme or cancel this action.

Explanation

No name was entered for the theme.

User response

Enter a name and then continue.

EJPAW0004W

You must enter the directory name where the theme files are located.

Explanation

No directory was entered.

User response

Enter a directory and continue.

EJPAW0005W

There is already a theme with this name. Please enter a unique name.

Explanation

A theme with this name already exists.

User response

Enter another name.

EJPAW0006W

The directory name should not include any path information.

Explanation

The directory name contains path information. This is not allowed.

User response

Enter the directory name without path information.

EJPAW0007E

There was an error while attempting to add the theme. Please consult the log file for more information.

Explanation

An error occurred while trying to add the theme.

User response

View the log for more information.

EJPAW0008E

There was an error while attempting to set the default portal theme. Please consult the log file for more information.

Explanation

An error occurred while trying to set the default portal theme.

User response

Log off and back on. If the problem still exists, view the log or contact your system administrator.

EJPAW0009W

You must enter a name for the skin or cancel this action.

Explanation

No name was entered for the skin.

User response

Enter a name and then continue.

EJPAW0010W

You must enter the directory name where the skin files are located.

Explanation

The correct directory was not entered.

User response

Enter the directory where the skin files are located.

EJPAW0011W

There is already a skin with this name. Please enter a unique name.

Explanation

A skin with this name already exists.

User response

Enter another name.

EJPAW0012E

There was an error while attempting to add the skin. Please consult the log file for more information.

Explanation

An error occurred while trying to add the skin.

User response

View the log for more information.

EJPAW0013E

There was an error while attempting to set the default portal skin. Please consult the log file for more information.

Explanation

An error occurred while trying to set the default portal skin.

User response

Log off and back on. If the problem still exists, view the log or contact your system administrator.

EJPAW0014E

There was an error while attempting to update the skin settings for this theme. Please consult the log file for more information.

Explanation

An error occurred while trying to update the skin settings for this theme.

User response

Log off and back on. If the problem still exists, view the log or contact your system administrator.

EJPAW0015W

Please select a locale first and then set the title.

Explanation

A locale must be selected before the title.

User response

Select a locale.

EJPAW0016W

You must enter a name for the title or cancel this action.

Explanation

No name was entered for the title.

User response

Enter a name and then continue.

EJPAW0017E

There was an error while attempting to edit the theme. Please consult the log file for more information.

Explanation

An error occurred while trying to edit the theme.

User response

Log off and back on. If the problem still exists, view the log or contact your system administrator.

EJPAW0018E

There was an error while attempting to edit the skin. Please consult the log file for more information.

Explanation

An error occurred while trying to edit the skin.

User response

Log off and back on. If the problem still exists, view the log or contact your system administrator.

EJPAW0019E

There was an error while attempting to delete the theme. Please consult the log file for more information.

Explanation

The theme selected can not be deleted. Another user may have deleted this theme.

User response

Log off and back on to verify the theme still exists. Retry the action. If it does not work, contact your system administrator.

EJPAW0020E

There was an error while attempting to delete the skin. Please consult the log file for more information.

Explanation

The skin selected can not be deleted. Another user may have deleted this skin.

User response

Log off and back on to verify the skin still exists. Retry the action. If it does not work, contact your system administrator.

EJPAW0021W

This skin has already been selected for this theme.

Explanation

This skin is already selected for this theme.

User response

Select a different skin.

EJPAW0022E

An exception occurred.

Explanation

This is a general error message. The log will contain more information.

User response

View the log for more details.

EJPAW0023E

There was an error while attempting to access data storage. Please consult the log file for more information.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAW0024E

Could not get a model.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAW0025E

RemoveSkinFromThemeCommand failed.

Explanation

The command to remove the skin from the theme failed.

User response

Log off and back on. If the problem still exists, view the log and/or contact your system administrator.

EJPAW0026E

SetSkinsForThemeCommand failed.

Explanation

The command to set the skins for the theme failed.

User response

Log off and back on. If the problem still exists, view the log and/or contact your system administrator.

EJPAW0027E

SetDefaultSkinCommand failed.

Explanation

The command to set the default skin failed.

User response

Log off and back on. If the problem still exists, view the log and/or contact your system administrator.

EJPAW0028E

SetPortalDefaultThemeCommand failed.

Explanation

The command to set the portal default theme failed.

User response

Log off and back on. If the problem still exists, view the log and/or contact your system administrator.

EJPAW0029E

SetPortalDefaultSkinCommand failed.

Explanation

The command to set the portal default skin failed.

User response

Log off and back on. If the problem still exists, view the log and/or contact your system administrator.

EJPAW0030E

InstallThemeCommand failed.

Explanation

The command to install a theme failed.

User response

Log off and back on. If the problem still exists, view the log and/or contact your system administrator.

EJPAW0031E

SetThemeSettingsCommand failed.

Explanation

The command to set the theme settings failed.

User response

Log off and back on. If the problem still exists, view the log and/or contact your system administrator.

EJPAW0032E

RemoveThemeSettingsCommand failed.

Explanation

The command to remove theme settings failed.

User response

Log off and back on. If the problem still exists, view the log and/or contact your system administrator.

EJPAW0033E

DeleteThemeCommand failed.

Explanation

The command to delete a theme failed.

User response

Log off and back on. If the problem still exists, view the log and/or contact your system administrator.

EJPAW0034E

InstallSkinCommand failed.

Explanation

The command to install skins failed.

User response

Log off and back on. If the problem still exists, view the log and/or contact your system administrator.

EJPAW0035E

SetSkinSettingsCommand failed.

Explanation

The command to set skin settings failed.

User response

Log off and back on. If the problem still exists, view the log and/or contact your system administrator.

EJPAW0036E

DeleteSkinCommand failed.

Explanation

The command to delete a skin failed.

User response

Log off and back on. If the problem still exists, view the log and/or contact your system administrator.

EJPAW0100I

Theme {0} added.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAW0101I

Theme {0} updated.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAW0102I

Theme {0} deleted.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAW0103I

Theme {0} set as portal default.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAW0110I

Skin {0} added.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAW0111I

Skin {0} deleted.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAW0112I

Skin {0} set as portal default.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAW0120I

The Portal default theme was updated.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAW0121I

The Portal default skin was updated.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAX: com.ibm.wps.portlets.uniquenames.resources.UniqueNamesMessages

EJPAX0001I

The custom name was changed successfully.

Explanation

The custom name was changed successfully.

User response

No action is required.

EJPAX0002I

The custom name was removed successfully.

Explanation

The custom name was removed successfully.

User response

No action is required.

EJPAX0003E

The custom name was not changed because of an internal API failure.

Explanation

The custom name was not changed because of an internal API failure.

User response

Correction of the condition is required.

EJPAX0004E

The custom name was not changed because the portlet lost track of the resource. Please try again.

Explanation

The request was most likely interrupted before it completed.

User response

Please try the request again.

EJPAX0005I

The custom name was not changed because cancel was pressed.

Explanation

The custom name was not changed because cancel was pressed.

User response

No action is required.

EJPAX0006I

The object has been removed by another administrator.

Explanation

The object has been removed by another administrator.

User response

No action is required.

EJPAX0007I

You no longer have the authority to change the custom name of this resource.

Explanation

This occurs if the user had access to edit a resource when the request was initiated but that access was removed before the transaction could be completed.

User response

Please ensure that you have the proper authority to perform this request and try again.

EJPAX0008E

The custom name was not changed because it is not unique.

Explanation

The custom name was not changed because it is not unique. Each custom name must be unique across the portal.

User response

Please choose a unique name for this resource that is not duplicated within the system.

EJPAX0009E

The custom name was not changed because there was a data backend exception.

Explanation

These was an error communicating with the backend database.

User response

Please try the request again. If you are still unsuccessful, please check that the database server is running properly and the portal system has proper access rights.

EJPAX0010E

The list of resources could not be retrieved because of an authorization data exception.

Explanation

The list of resources could not be accessed because the current user does not have the proper access control rights to view the list.

User response

Please check the user's access rights and try again.

EJPAX0011E

The item could not be retrieved because of an authorization data exception.

Explanation

The item could not be accessed because the current user does not have the proper access control rights to view the list.

User response

Correction of the condition is required.

EJPAX0012E

Could not be determined if the item is editable.

Explanation

The system could not determine if this item is editable.

User response

Please ensure that the current user has process access rights to edit this resource and try again.

EJPAX0013E

There was a table model exception when trying to acquire page title or description to display in the table.

Explanation

There was a table model exception when trying to acquire page title or description to display in the table.

User response

Correction of the condition is required.

EJPAX0014E

There was a command exception when trying to acquire portlet title or description to display in the table.

Explanation

There was a command exception when trying to acquire portlet title or description to display in the table.

User response

Correction of the condition is required.

EJPAX0015E

There was a search exception when trying to handle the action performed.

Explanation

There was a search exception when trying to handle the action performed.

User response

Correction of the condition is required.

EJPAX0016E

There was an exception when trying to handle an action performed in the table.

Explanation

There was an exception when trying to handle an action performed in the table.

User response

Correction of the condition is required.

EJPAX0017E

There was an exception because the table could not handle the action performed.

Explanation

There was an exception because the table could not handle the action performed.

User response

Correction of the condition is required.

EJPAX0018E

The number of rows per page must be greater than or equal to 1.

Explanation

The number of rows displayed per page was set to be less than one.

User response

Chose a number of rows to display that is greater than or equal to 1.

EJPAX0019E

The number of rows per page must be an integer number.

Explanation

The number of rows per page was set to a non-integer value.

User response

Chose a number of rows to display that is an integer greater than or equal to 1.

EJPAX0020E

An I/O exception occurred when trying to store the portlet settings.

Explanation

An I/O error occurred while saving the updated portlet settings.

User response

Please try again.

EJPAX0021E

An access denied exception occurred when trying to store the portlet settings.

Explanation

An access denied exception occurred when trying to store the portlet settings.

User response

Please ensure that the user has the proper access rights to update the portlet settings.

EJPAX0022E

The number of rows per page must be greater than or equal to 1.

Explanation

The number of rows displayed per page was set to be less than zero.

User response

Chose a number of rows to display that is greater than or equal to 1.

EJPAX0023E

The number of rows per page must be an integer number.

Explanation

The number of rows per page was set to a non-integer value.

User response

Chose a number of rows to display that is an integer greater than or equal to 1.

EJPAX0024E

An I/O exception occurred when trying to store the portlet data.

Explanation

An I/O error occurred while saving the updated portlet settings.

User response

Please try again

EJPAX0025E

An access denied exception occurred when trying to store the portlet data.

Explanation

An access denied exception occurred when trying to store the portlet data.

User response

Please ensure that the user has the proper access rights to update the portlet settings.

EJPAX0026E

There was an exception when trying to acquire the locale for portlet application title or description to display in the table.

Explanation

There was an exception when trying to acquire the locale for portlet application title or description to display in the table.

User response

Please ensure that there is at least one language supported by the portal and that there is a default language set in the Global Settings portlet.

EJPAX0027E

There was a command exception when trying to acquire portlet application title or description to display in the table.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Please ensure that there is at least one language supported by the portal and that there is a default language set in the Global Settings portlet.

EJPAX0028E

There was a model exception when trying to acquire the ModelUtil while trying to display title or description in the table.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Correction of the condition is required.

EJPAX0029E

There was a model exception when trying to acquire the URL Mapping Model while trying to display title or description in the table.

Explanation

There was a model exception when trying to acquire the URL Mapping Model while trying to display title or description in the table.

User response

Correction of the condition is required.

EJPAX0030E

There was an exception when trying to acquire the root while trying to display title or description in the table.

Explanation

There was an exception when trying to acquire the root while trying to display title or description in the table.

User response

Correction of the condition is required.

EJPAX0031E

There was an exception when trying to find the object while trying to display title or description in the table.

Explanation

There was an exception when trying to find the object while trying to display title or description in the table.

User response

Correction of the condition is required.

EJPAX0032E

There was a model exception when trying to read the context while trying to display title or description in the table.

Explanation

There was a model exception when trying to read the context while trying to display title or description in the table.

User response

Correction of the condition is required.

EJPAX0033E

There was a command exception when trying to acquire usergroup name to display in the table.

Explanation

There was a command exception when trying to acquire usergroup name to display in the table.

User response

Correction of the condition is required.

EJPAX0034E

There was a command exception when trying to acquire a vault segment to display in the table.

Explanation

There was a command exception when trying to acquire a vault segment to display in the table.

User response

Correction of the condition is required.

EJPAX0035E

There was a command exception when trying to acquire a vault slot to display in the table.

Explanation

There was a command exception when trying to acquire a vault slot to display in the table.

User response

Correction of the condition is required.

EJPAX0036E

There was a command exception when trying to acquire a web module to display in the table.

Explanation

There was a command exception when trying to acquire a web module to display in the table.

User response

Correction of the condition is required.

EJPAX0037E

There was an exception when trying to acquire the locale for page title or description to display in the table.

Explanation

There was an exception when trying to acquire the locale for page title or description to display in the table.

User response

Correction of the condition is required.

EJPAX0038E

There was an exception when trying to acquire the locale for portlet title or description to display in the table.

Explanation

This is an error message. The portal system cannot handle this condition without failing.

User response

Please ensure that there is at least one language supported by the portal and that there is a default language set in the Global Settings portlet.

EJPAX0039E

There was an illegal state exception when trying to acquire page title or description to display in the table.

Explanation

There was an illegal state exception when trying to acquire page title or description to display in the table.

User response

Correction of the condition is required.

EJPAX0040E

The maximum number of results must be greater than or equal to 1.

Explanation

The maximum number of results was set to be less than 1.

User response

Please select a positive integer value to define the number of search results that are returned.

EJPAX0041E

The maximum number of results must be an integer number.

Explanation

The maximum number of results was set to an illegal value.

User response

Please select a positive integer value to define the number of search results that are returned.

EJPAX0042E

The maximum number of results must be greater than or equal to 1.

Explanation

The maximum number of results was set to be less than 1.

User response

Please select a positive integer value to define the number of search results that are returned.

EJPAX0043E

The maximum number of results must be an integer number.

Explanation

The maximum number of results was set to an illegal value.

User response

Please select a positive integer value to define the number of search results that are returned.

EJPAX0044E

There was a command exception when trying to acquire wsrp producer title or description to display in the table.

Explanation

There was a table model exception when trying to acquire page title or description to display in the table.

User response

Correction of the condition is required.

EJPAY: com.ibm.wps.portlets.urlmapping.resources.UrlmappingMessages

EJPAY0001E

A datastore access error occurred.

Explanation

An unexpected exception occurred while creating the table model to display.

User response

Correction of the condition is required.

EJPAY0002E

The context can no longer be located. It may have been deleted.

Explanation

The previously specified URL Mapping context can not be found. It may have been deleted by another administrator.

User response

Please select another URL Mapping context.

EJPAY0003W

You do not have permission to create new URL contexts.

Explanation

You do not have permission to create new URL contexts. The "New Context" button is disabled.

User response

No action is required.

EJPAY0010E

Invalid characters were found in a context name or label: {0}.

Explanation

The URL Mapping context becomes part of the portal URL when used. Therefore it must contain only characters that are allowed in URLs.

User response

Please only use characters that are valid in URLs in the URL Mapping Context.

EJPAY0020E

Error occurred when creating new context {0}.

Explanation

An unexpected error occurred while creating the new URL context.

User response

Please check that the context is a valid URL portion and try again.

EJPAY0030E

Error occurred when removing context {0}.

Explanation

An unexpected error occurred while deleting the context.

User response

Please ensure that the context was not deleted by another administrator and that the current user has access to delete the context.

EJPAY0031E

Error occurred when removing the mapping for context {0}.

Explanation

An error occurred while removing the mapping for this context.

User response

Please ensure that this mapping still exists and that this user has the access rights to remove it.

EJPAY0040E

Error occurred when setting context label.

Explanation

An unexpected error occurred while editing the context label.

User response

Please ensure that the label has not been deleted by another administrator and that the current user has access to edit the label.

EJPAY0041E

Label {0} is already in use in this Context.

Explanation

A non-unique label was entered. Label must be unique within each label so that they make valid URLs.

User response

Please enter a unique label or chose another context.

EJPAY0042I

No label was specified.

Explanation

No label was specified.

User response

Please specify a label.

EJPAY0043E

Labels cannot be longer than 255 characters.

Explanation

A label longer than 255 characters was specified.

User response

Please specify a value for the label shorter than 256 characters.

EJPAY0044E

Label {0} is already in use in Context {1}.

Explanation

A non-unique label was entered. Label must be unique within each context so that they make valid URLs.

User response

Please enter a unique label or chose another context.

EJPAY0050E

Error occurred when assigning the mapping for context {0}.

Explanation

An unexpected error occurred when assigning the mapping for this context.

User response

Please ensure that the mapping is unique for this context and try again.

EJPAY0055W

No page was selected.

Explanation

No page was selected.

User response

Please select a page and try again.

EJPAY0100I

Context {0} was created successfully.

Explanation

The context was created successfully.

User response

No action is required.

EJPAY0120I

Context {0} was deleted successfully.

Explanation

The context was deleted successfully.

User response

No action is required.

EJPAY0130I

The mapping for context {0} was removed successfully.

Explanation

The mapping for this context was removed successfully.

User response

No action is required.

EJPAY0200I

Context {0} was updated successfully.

Explanation

This context was updated successfully.

User response

No action is required.

EJPAY3050E

A positive integer is needed for field {0}. Saving of configuration data failed.

Explanation

An invalid entry was provided for this field.

User response

Please provide a positive integer value for this field and try again.

EJPAY3060E

A positive integer is needed for field {0}. Saving of edited data failed.

Explanation

An invalid entry was provided for this field.

User response

Please provide a positive integer value for this field and try again.

EJPAZ: com.ibm.wps.portlets.vault.resources.VaultMessages

EJPAZ0001I

The system credential was successfully modified.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAZ0002E

The system credential could not be modified. Refer to the portal log for details.

Explanation

The system credential could not be modified.

User response

Verify that you have permission to do this action. Log off and back on. If the problem still occurs, view the logs and/or contact your system administrator. Verify the default segments were created during install.

EJPAZ0003W

Your passwords do not match.

Explanation

The passwords entered do not match.

User response

Reenter the passwords.

EJPAZ0004W

The names of vault segments, vault slots, and resources may not use the pipe character.

Explanation

An invalid character was used.

User response

Reenter the name using only valid characters.

EJPAZ0005E

The languages supported by this portal could not be retrieved.

Explanation

There was an error in retrieving the languages that this portal can support.

User response

Log off and back on. If the problem still exists, check the logs and/or contact your system administrator.

EJPAZ0006E

A vault segment was not created: a vault segment with that name already exists.

Explanation

This name already is in use.

User response

Enter a name that is not already in use.

EJPAZ0007E

A vault segment was not created: you must specify a vault segment name.

Explanation

The vault segment name field must have a value entered.

User response

Enter a value for the vault segment name.

EJPAZ0008I

The vault segment was created successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAZ0009E

The vault segment could not be created. Refer to the portal log for details.

Explanation

The vault segment information you specified could not be created.

User response

Verify that you have permission to do this action. Log off and back on. If the problem still occurs, view the logs and/or contact your system administrator.

EJPAZ0010I

The vault segment was successfully deleted.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAZ0011E

The vault segment could not be deleted. Refer to the portal log for details.

Explanation

This vault segment may have been deleted by someone else or you may not have permission to do this action.

User response

Verify that you have permission for this action. Log off and back on. If the problem still exists, view the log and/or contact your system administrator.

EJPAZ0012E

There are no vault segments to display.

Explanation

There are no vault segments to display.

User response

Create vault segments.

EJPAZ0013E

The vault segment could not be retrieved. Refer to the portal log for details.

Explanation

There was an error in trying to retrieve this vault segment.

User response

Verify that this vault segment exists. Log off and back on. If the problem still exists, view the log and/or contact your system administrator.

EJPAZ0014I

The vault slot was created successfully.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAZ0015E

The vault slot was not created. Refer to the portal log for details.

Explanation

This vault slot could not be created.

User response

Verify that you have permission for this action. Log off and back on. If the problem still exists, view the log and/or contact your system administrator.

EJPAZ0016W

The vault slot was not created. You must specify a vault slot name, a vault segment, and a resource.

Explanation

The vault slot can not be created without a valid slot name, vault segment and vault resource.

User response

Enter in a valid slot name, segment and resource.

EJPAZ0017I

The vault slot was successfully deleted.

Explanation

This is an information message that provides feedback on the state of the portal system.

User response

No action is required.

EJPAZ0018E

The vault slot was not deleted. Refer to the portal log for details.

Explanation

This vault slot may have been deleted by someone else or you may not have permission to do this action.

User response

Log off and back on. Verify the vault slot has not been deleted. If it is still there and you are not able to delete it, view the log and/or contact your system administrator.

EJPAZ0019W

The vault slot was not created. You must specify a userid and password to create a shared vault slot.

Explanation

The vault slot can not be created without a valid userid and password.

User response

Enter the userid and password.

EJPAZ0020E

The slot ({0}) already exists.

Explanation

This slot has already been created.

User response

Enter in a different slot name.

EJPAZ0021W

The vault slot was not modified. You must specify a userid and password to modify a shared vault slot.

Explanation

The vault slot can not be modified without a valid userid and password.

User response

Enter the userid and password.

EJPCA: com.ibm.wps.config.logging.resources.InstallAndConfigMessages

EJPCA1001I

Checking LDAP parameters.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1002I

LDAP parameter check succeeded.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1003E

LDAP parameter check failed.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1004I

Checking connection to database.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1005I

Database connection check succeeded.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1006E

Database connection check failed.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1007I

Checking connection to LDAP server.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1008I

LDAP connection check succeeded.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1009E

LDAP connection check failed.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1010I

Checking for LDAP user "{0}"

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1011I

Check for LDAP user "{0}" succeeded.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1012E

Check for LDAP user "{0}" failed.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1013I

Checking for LDAP suffix "{0}"

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1014I

Check for LDAP suffix "{0}" succeeded.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1015E

Check for LDAP suffix "{0}" failed.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1016I

Checking for LDAP group "{0}"

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1017I

Check for LDAP group "{0}" succeeded.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1018E

Check for LDAP group "{0}" failed.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1019I

Checking WebSphere Application Server at "{0}"

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1020I

Check for WebSphere Application Server succeeded.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1021E

Check for WebSphere Application Server failed.

Explanation

This is a general error message. Check to make sure that WebSphere Application Server is installed.

User response

The error condition must be corrected.

EJPCA1022I

Checking WebSphere Application node "{0}"

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1023I

Check for WebSphere Application node succeeded.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1024E

Check for WebSphere Application node "{0}" failed.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1025I

Checking for connection to HTTP server "{0}"

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1026I

HTTP server check succeeded.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1027E

Failed to connect to HTTP server "{0}".

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1028I

Checking for connection to WebSphere Portal Server "{0}"

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1029I

WebSphere Portal Server connection succeeded.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1030E

Failed to connect to WebSphere Portal Server "{0}".

Explanation

This is a general error message. Check to make sure WebSphere Portal Server is installed correctly and can be started without error.

User response

The error condition must be corrected.

EJPCA1031I

Checking Portal administrative user "{0}"

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1032I

Check for Portal administrative user succeeded.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1033E

Check for Portal administrative user "{0}" failed.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1034I

Checking user "{0}" for adminrole privileges.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1035I

Check for for adminrole privileges for user "{0}" succeeded.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1037I

Checking group "{0}" for adminrole privileges.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1038I

Check for for adminrole privileges for group "{0}" succeeded.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1039E

Check for for adminrole privileges for group "{0}" failed.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1040I

Checking database system.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1041I

Database system check succeeded.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1042E

Database system check failed.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1043I

Checking for connection to HTTP proxy "{0}"

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1044I

HTTP proxy check succeeded.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1045E

Failed to connect to HTTP proxy "{0}".

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1046I

Checking HTTP server instance "{0}"

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1047I

HTTP server instance check succeeded.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1048E

Check for HTTP server instance "{0}" failed.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1049I

HttpCheckTask: Task SUCCEEDED.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1050E

HttpCheckTask: Task FAILED, response code: "{0}".

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1051E

HttpCheckTask: Task FAILED due to invalid input. URL must not be empty or null.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1052I

"HttpCheckTask: Attempting to connect to URL "{0}".

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1053E

HttpCheckTask: Failed to connect to URL. HTTP server responded: "{0}".

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1054E

HttpCheckTask: Caught java.net.UnknownHostException, cannot resolve host or connect to server: "{0}".

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1055E

LdapCheckTask: caught javax.naming.InvalidNameException, cannot resolve parameter: "{0}".

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1056E

LdapCheckTask: caught javax.naming.NameNotFoundException while checking for "{0}" in the directory.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1057E

LdapCheckTask: caught javax.naming.AuthenticationException, user is not found, password is incorrect or user does not have sufficient privileges to query directory.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1058E

LdapCheckTask: caught exception "{0}" while checking for "{1}" in the directory. In most cases, object being checked does not exist in the directory.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1059I

LdapCheckTask: Task SUCCEEDED.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1060I

PortalAdminCheckTask: Task SUCCEEDED.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1061E

PortalAdminCheckTask: Task FAILED. Portal responded, but login information is incorrect.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1062E

PortalAdminCheckTask: Task FAILED. Could not create export file, verify that current user has read and write permissions on PortalServer directory.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1063E

PortalAdminCheckTask: Task FAILED. Could not connect to WebSphere Portal at URL "{0}". Verify that the values in the properties file are correct, and that the Portal is running.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1064E

PortalAdminCheckTask: Task FAILED. Input is incorrect, check properties for user, password and URL and retry the task.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1065E

PortalAdminCheckTask: Task FAILED. User cannot be found in the Portal.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1066E

PortalAdminCheckTask: Task FAILED. User cannot authenticate with the specified password.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1067I

SqlProcessorTask: SUCCEEDED.

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA1068E

SqlProcessorTask: FAILED. UserID "{0}" or password is incorrect.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1069E

SqlProcessorTask: FAILED. Cannot load driver class "{0}".

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1070E

Database schema name "{0}" not valid.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1072E

Database schema "{0}" already exists.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1073E

The component "{0}" is not properly configured.

Explanation

This is a general error message. Check the values that you supplied in the wkplc.properties file.

User response

The error condition must be corrected.

EJPCA1074I

Please verify that the installed IBM WebSphere Process Server is at the 6.02 level or higher.

Explanation

Validation checking detected that IBM WebSphere Process Server is installed.

User response

Verify that the installed IBM WebSphere Process Server is at 6.02 level or higher. Earlier versions of IBM WebSphere Process Server do not support federation into an unmanaged node.

EJPCA1500I

The Discovered Operating System type is {0}

Explanation

This is a general information message. It provides status information about portal dependency checking.

User response

No action is required.

EJPCA1501E

The Operating System could not be discovered.

Explanation

This is a general error message. Make sure that you are installing on a supported Operating System.

User response

The error condition must be corrected.

EJPCA1502I

The installed Operating System level is supported.

Explanation

This is a general information message. It provides status information about portal dependency checking.

User response

No action is required.

EJPCA1503W

The installed Operating System level is not supported.

Explanation

This is a general warning message. Make sure that you are installing on a supported Operating System.

User response

The error condition must be corrected.

EJPCA1504W

The Operating System is missing the following required patches: {0}

Explanation

This is a general warning message. Make sure that you are installing on a supported Operating System with all required patches.

User response

The error condition must be corrected.

EJPCA1505I

The installed level of Component {0} is supported.

Explanation

This is a general information message. It provides status information about portal dependency checking.

User response

No action is required.

EJPCA1506W

The installed level of Component {0} is not supported.

Explanation

This is a general warning message. Make sure that level of the Component is supported.

User response

The error condition must be corrected.

EJPCA1507W

The Component {0} is missing the following required patches: {1}

Explanation

This is a general warning message. Make sure that Component has all the required patches.

User response

The error condition must be corrected.

EJPCA1510E

The WebSphere Application Server installed at location {0} does not have the required {1} component installed.

Explanation

This is a general error message. Make sure that the WebSphere Application Server has all the required components installed.

User response

The error condition must be corrected.

EJPCA1511E

The WebSphere Application Server installed at location {0} does not have the required emergency fix {1} installed.

Explanation

This is a general error message. Make sure that the WebSphere Application Server has all the required emergency fixes installed.

User response

The error condition must be corrected.

EJPCA1512I

Discovery processing discovered the {0} component

Explanation

This is a general information message. It provides status information about portal dependency checking.

User response

No action is required.

EJPCA1513I

Discovery processing located the X11R6 libraries

Explanation

This is a general information message. It provides status information about portal dependency checking.

User response

No action is required.

EJPCA1514W

Discovery processing did not locate the X11R6 libraries

Explanation

This is a general warning message. Make sure that the X11R6 libraries are installed on your system.

User response

The error condition must be corrected.

EJPCA1515I

Discovery processing located all required libraries needed by the Productivity Components.

Explanation

This is a general information message. It provides status information about portal dependency checking.

User response

No action is required.

EJPCA1516W

Discovery processing did not locate all required libraries needed by the Productivity Components. If these libraries are not installed, the Productivity Components may not function properly.

Explanation

This is a general warning message. Make sure that all required libraries needed by the Productivity Components are installed.

User response

The error condition must be corrected.

EJPCA1517I

The Discovered specific Operating System type and version is {0}

Explanation

This is a general information message. It provides status information about portal dependency checking.

User response

No action is required.

EJPCA1518I

Discovery processing discovered WebSphere Application Server installed at location {0} has framework component {1}

Explanation

This is a general information message. It provides status information about portal dependency checking.

User response

No action is required.

EJPCA1519W

Unable to get PortalUniqueId from MAC Address. You should attempt to set this field from the 12 hexadecimal digits (2 for each of the six parts of the address) from a MAC address on the machine. Initially set based on timestamp to {0}.

Explanation

This is a general warning message. Attempt to set the PortalUniqueId manually.

User response

The error condition must be corrected.

EJPCA1520I

Discovered PortalUniqueId from MAC Address as {0}.

Explanation

This is a general information message. It provides status information about portal dependency checking.

User response

No action is required.

EJPCA1521W

Discovered WPCP Runtime Server is using WebSphere Application Server instance at {0}. WebSphere Portal cannot get set up to use this same instance.

Explanation

This is a general warning message. Install WebSphere Portal on another WebSphere Application Server instance.

User response

The error condition must be corrected.

EJPCA1522E

The WebSphere Application Server installed at location {0} does not have the same version in products: {1}

Explanation

This is a general error message. Make sure that products have the same version.

User response

The error condition must be corrected.

EJPCA1523E

This product requires at least {0} file descriptors for installation. Please exit the install, update this value using ulimit -n, and try again.

Explanation

This is a general error message.

User response

The error condition must be corrected.

EJPCA2040I

Updating convertors.xml with remoteHost {0}

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA2501I

This product is now licensed for use as specified in the License Acceptance and License Information documents pertaining to the licensed copy of this product. USE OF THE PRODUCT CONSTITUTES ACCEPTANCE OF THE TERMS OF THE IBM LICENSE ACCEPTANCE AND LICENSE INFORMATION DOCUMENTS, LOCATED IN THE FOLLOWING DIRECTORY: {0}

Explanation

Upgrade from trial to production use was successful.

User response

No action is required.

EJPCA2505E

Invalid license certificate file.

Explanation

A valid license certificate file was not found. Upgrade from trial to production has failed.

User response

Ensure that a valid license certificate file exists at the location specified by the -Dlicense parameter and retry the task.

EJPCA2506E

File {0} is not found.

Explanation

A valid license certificate file was not found at the indicated location. Upgrade from trial to production has failed.

User response

Ensure that a valid license certificate file exists at the location specified by the -Dlicense parameter and retry the task.

EJPCA3001I

"{0}" already there. No action taken

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3002E

ERROR: "{0}" already there

Explanation

This is a general error message. The portal configuration cannot handle this condition.

User response

Correction of the condition is required.

EJPCA3003I

"{0}" not there. No action taken

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3004E

ERROR: "{0}" not there

Explanation

The indicated name or value could not be found. This may be simply a typographical error, or may indicate a more fundamental inconsistency in the configuration or the input properties files.

User response

Correction of the condition is required. If possible, correct the name or value that was used so that an existing entity is referenced.

EJPCA3005I

"{0}" successfully created/modified

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3006E

ERROR: "{0}" could not be created/modified

Explanation

The named object could either not be created, or if it already existed, could not be modified. Other error messages, possibly in the SystemOut.log or SystemErr.log, may indicate the exact underlying reason for the inability to make the desired change.

User response

Correction of the condition is required. If possible, correct the condition indicated by any error messages and retry the operation.

EJPCA3007I

"{0}" successfully removed

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3008E

ERROR: "{0}" could not be removed

Explanation

This is a general error message. The portal configuration cannot handle this condition.

User response

Correction of the condition is required.

EJPCA3009I

The WebSphere Portal Server HTTP port has been configured to "{0}". The WebSphere Portal can now be accessed using the URL http://localhost:{0}/{1}/{2}

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3100I

Configuration task "{0}" in progress

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3101E

Configuration task "{0}" failed.

Explanation

This is a general error message. The portal configuration cannot handle this condition.

User response

Correction of the condition is required.

EJPCA3102I

Configuration task "{0}" is complete.

Explanation

This is an information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3103I

Creating database "{0}"

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3104E

Database "{0}" creation failed

Explanation

This is a general error message. The portal configuration cannot handle this condition.

User response

Correction of the condition is required.

EJPCA3105I

Database "{0}" created

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3106I

Initializing database "{0}"

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3107E

Database "{0}" initialization failed

Explanation

This is a general error message. The portal configuration cannot handle this condition.

User response

Correction of the condition is required.

EJPCA3108I

Database "{0}" initialized

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3109I

Removing database "{0}"

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3110E

Database "{0}" remove failed

Explanation

This is a general error message. The portal configuration cannot handle this condition.

User response

Correction of the condition is required.

EJPCA3111I

Database "{0}" removed

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3112I

Updating database "{0}"

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3113E

Database "{0}" update failed

Explanation

This is a general error message. The portal configuration cannot handle this condition.

User response

Correction of the condition is required.

EJPCA3114I

Database "{0}" updated

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3115I

Creating JDBC provider "{0}"

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3116E

JDBC provider "{0}" creation failed

Explanation

This is a general error message. The portal configuration cannot handle this condition.

User response

Correction of the condition is required.

EJPCA3117I

JDBC provider "{0}" created

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3118I

Removing JDBC provider "{0}"

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3119E

JDBC provider "{0}" remove failed

Explanation

This is a general error message. The portal configuration cannot handle this condition.

User response

Correction of the condition is required.

EJPCA3120I

JDBC provider "{0}" removed

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3121I

Creating data source "{0}"

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3122E

Data source "{0}" creation failed

Explanation

This is a general error message. The portal configuration cannot handle this condition.

User response

Correction of the condition is required.

EJPCA3123I

Data source "{0}" created

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3124I

Removing data source "{0}"

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3125E

Data source "{0}" remove failed

Explanation

This is a general error message. The portal configuration cannot handle this condition.

User response

Correction of the condition is required.

EJPCA3126I

Data source "{0}" removed

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.

EJPCA3127I

Creating application server "{0}"

Explanation

This is a general information message. It provides status information about portal configuration.

User response

No action is required.